CNC xPRO V5 USB 4 Axis Motion Card Controller Bundle for Wood CNC Router MillWe are honoured to become a registered distributor of Spark Concepts' xPRO V5, the most advanced GRBL based motion controller in the World!The plug and play xPRO V5 brings you the advanced stepping and power of Trianamic drivers along with Wifi and USB interfaces, all powered by a 32 bit processor and wrapped in a beautiful ABS case (with integrated cooling).The cables on this Bundle are designed for machines of the following sizes:

• 500mm x 750mm
• 750mm x 750mm
• 750mm x 1000mm
• 1000mm x 1000mm
• 1000mm x 1500mm
• 1500mm x 1500mm

This controller bundle is fully compatible with the latest version of GRBL which is an excellent control software for our CNC machines.The controller bundle contains all the electronic hardware required to run your machine and has been designed to be as intuitive and easy to install as possible.More Details:Control System:CNC xPRO V5:

• High Power6A stepper driversbased on the Trinamic TMC5160
• SleekWeb Interfacewith cut-from-SD capability (SD card included)
• USB-C interface work with GRBL sender programs
• Built-in Heatsink & Temperature Controlled Cooling Fan
• Fully assembled in a custom ABS case
• VFD support -PWM, 0-10V, and RS485
• Laser support -PWM, 0-5V, 0-10V
• XYZ Probe input
• Integrated relay
• Safety Door/Estop switch terminal
• Integrated power switch
• 4 software defined, independent motor drivers can:
  • Clone any axis (default to XYYZ)
  • True 4 axis motion XYZA

Selectable limit switch voltage (5V or 24v)

Please note: xPROV5 is GRBL32(Firmware) processor, which does not recommend to upgrade the firmware to FluidNC. Please keep the existing GRBL32

and existing files installed for use.

Documentation:xPRO V5 Documentation - By Spark ConceptsPower Supply

• Output Voltage-Channel: 24V
• Output Power: 348 W
• Enclosed Case
• Input Voltage: 90 VAC to 132 VAC/180 VAC to 264 VAC, 240 VDC to 370 VDC
• Output Current-Channel: 14.6A
• Mounting Style: Chassis
• Length: 215 mm
• Width: 115 mm
• Height: 30 mm
• Input Frequency: 47 Hz to 63 Hz
• Unit Weight: 760 g

Electrical Cable and connectors

• 4 Core and 2 Core shielded cable for best performance and reduced EMI
  • EDG 4 pin Connectors included
• 16 AWG for Power Supply to CNC xPRO V5
• 2 core DC Cable for E-Stop

Signal:Limit Switch Kits

• 3 x Micro Limit Switch
• 3 x Limit Switch Plate
• 6 x M3 10mm Cap Head Screw
• 3 x M5 8mm Low Profile Screw
• 3 x M5 Drop-in Tee Nut
• NOTE:The holes in the switch will need tobe opened a little (3mm drill bit) to allow for the M3 screw or alternatively you can use a M3 tap to cut a thread into the plastic.

E-Stop Switch

• Max Current: 10A
• Max Voltage AC 660V
• Rated Load:
  • AC: 220VAC/6A, 380VAC/4A, 660VAC/2A
  • DC: 440VDC/0.3A, 220VDC/0.5A, 110VDC/1A
• TYPE: N/C
• Withstand Voltage: 2500V /60S
• Temperature: -25°~+55°
• Contact resistance: <25mΩ

Regarding our Shielded Cables:

• The 4 core and 2 core shielded cables by Bulk-Man 3D are cut in the proper length for customers convenience which meet the needs and multifunction of different size of our CNC Machine.

• This high quality 4 core cable has 2 layers of insulation and 2 shield layers to reduce signal interference and maximiseefficiency.

• The four insulated wires are shielded by oxygen free tinned annealed copper wire braid with Aluminium/PET tape (100% coverage) to shield the cores from EMF interference.

• This is again insulated by a thick clear layer of thermoplastic sheath insulation. Suitable for applications requiring electrical/electronic screening of cable. 22AWG suitable for 300V DC and up to 80°C

Resources and Assembly ManualsFor your convenience, the Assembly Manual as well as the resources for making this bundle functional can be found at our resources page: Message UsPlease Note:

• For your safety, we recommend to have all high voltage or mains voltage systems be wired in by a licensed electrician.
• Make sure to have the power turned off when adjusting your wiring.
• Do not disconnect the stepper motors while power is applied.

PaymentDelivery detailsTerms of Sale (VAT)Return PolicyContact usPaymentWe accept the Forms of Purchase:

• Online orders via store by any payment methods supported by (Recommend for retail orders)
• Become our Distributor Partner, Drop-Shipping, Get more Discount!
• If you have problems on ordering via our store, please do not hesitate to contact us, we will support you at first time!

Delivery details

• We can not arrange shipments on weekends or public holidays.
• Orders will be dispatched within 2 - 5 business days after payment received.
• After your order is shipped, you will receive the tracking number and also the tracking number will be added to your order for you to track.
• We can ship to you by UPS/DHL/TNT/EMS/Fedex and SpeedPAK Standard/ Economy shipping method etc. We will choose the best shipping method for you,pls contact us if you have questions about shipping.
• Please be advised that the international delivery time highly depends on your local customs and shipping services policy.
• If your product has not arrived within the estimated delivery time, please contact us.

Terms of Sale (VAT)

• Import duties, taxes and charge are not included in the product price or shipping charge. Those charges should be paid by the buyer.
• We usually will mark the goods for a low cost on the customs declaration and we are trying to help you minimize or avoid GST or V.A.T or other import taxes. But we cannot guarantee no tax charge as it is depends on your country's policy.
• Please NOTE that seller will not pay the local customs cost when the package arrive destination country.

Return Policy

• We offer 30 day returns, efective or non-defective. Return must include all original package and accesorries, item must in good condition.
• Defective item: customers first pay the shipping fee and ship back the item,we check and confirm,then we will offer refund.
• Non-defective item: 30 days return, buyer need to pay for the returning shipping fee and tax, and we will offer refund your payment, but not include shipping fee.
• Important Note: Once the goods are shipped and in transit, we DO NOT accept any cancellations and returns.

Contact us

• We will work with you to until you are satisfied. we sincerely hope that you can leave us a Positive response& 5 Stars
• If you are not satisfied with the items, please contact us first via Contact Seller. Your messages will be answered within 1-2 business day. We will try our best to solve your problem to your satisfaction.
• Any other question welcome to contact us by message.We are always here with you!
• Our working time is 8:30AM - 6:30PM from Monday - Friday.
• Become our Distributor Partner, Drop-Shipping, Get more Discount!