Bigtreetech EBB 36/42 MAX Can Bus for Klipper Hotend Tool Head Expansion DeviceBIGTREETECH EBB42 CAN is a nozzle adapter board specially designed for the 42 extruder stepper motor, BIGTREETECH EBB36 CAN is a nozzle adapter board specially designed for the 36 extruder stepper motor. They can communicate via USB port, or CAN BUS, greatly simplifying wirings. Note: Please ensure you have compatible board that support CANBUS or you need U2C connected to your raspberry pi. Note: Wiring is not included. We do recommenced using FEP/PTFE wiring if using drag chains. Kit include one set of each tool head connectors and pins, excluding type c cable. Ensure your power line(24/12v) have enough AWG (20-22AWG), while dataline 24-26awg is suitable or source a 4 core 22 awg wire. Ensure you have fuse on power line when possible. Note: Always verify STM chip version when flashing firmware. For more information about BTT EBB CAN , you can check below resources: https://github.com/bigtreetech/EBB Documentation: Features: With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB. Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from the heating rod. User can select the thermistor's pull-up resistors values through jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY. Connect the USB witha jumper cap to get it power on, which effectively isolates the main control board DC-DC from USB 5V. Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions. Added anti-flyback diodes on the heating rod and fans' ports effectively protect the MOS tube from being burned due to reverse voltage. Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connecting the reverse power line during DIY. Onboard MAX31865 supports selecting 2-wire or 4-wire of PT100/ PT1000. Supports communication via CAN or USB. The terminal resistor 120R of CAN can be selected through the jumper cap, and it reserves CAN expansion interfaces. Equipped ESD protection chip on the USB port prevents the main control board from being broken down by the static electricity of the USB port. The adapter board is equipped with terminals, female reeds, double-way studs and screws, which are required accessories for DIY, greatly meeting the DIY needs of customers. Bigtreetech EBB 36/42 MAX Can Bus for Klipper Hotend Tool Head Expansion Device
All Prices include GST. Message us if require a tax invoice.
BIGTREETECH EBB42 CAN is a nozzle adapter board specially designed for the 42 extruder stepper motor, BIGTREETECH EBB36 CAN is a nozzle adapter board specially designed for the 36 extruder stepper motor. They can communicate via USB port, or CAN BUS, greatly simplifying wirings.
Note: Please ensure you have compatible board that support CANBUS or you need U2C connected to your raspberry pi.
Note: Wiring is not included. We do recommenced using FEP/PTFE wiring if using drag chains. Kit include one set of each tool head connectors and pins, excluding type c cable. Ensure your power line(24/12v) have enough AWG (20-22AWG), while dataline 24-26awg is suitable or source a 4 core 22 awg wire. Ensure you have fuse on power line when possible.
Note: Always verify STM chip version when flashing firmware.
For more information about BTT EBB CAN , you can check below resources:
[link removed by ]
Documentation: [link removed by ]
Features:
- With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
- Added protection circuit on the thermistor avoids burning the main control chip causéd by leakage current from the heating rod.
- User can select the thermistor's pull-up resistors values through jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY.
- Connect the USB witha jumper cap to get it power on, which effectively isolates the main control board DC-DC from USB 5V.
- Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions.
- Added anti-flyback diodes on the heating rod and fans' ports effectively protect the MOS tube from being burned due to reverse voltage.
- Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connecting the reverse power line during DIY.
- Onboard MAX31865 supports selecting 2-wire or 4-wire of PT100/ PT1000.
- Supports communication via CAN or USB. The terminal resistor 120R of CAN can be selected through the jumper cap, and it reserves CAN expansion interfaces.
- Equipped ESD protection chip on the USB port prevents the main control board from being broken down by the static electricity of the USB port.
- The adapter board is equipped with terminals, female reeds, double-way studs and screws, which are required accessories for DIY, greatly meeting the DIY needs of customers.
HAVE A QUESTION OR CONCERN?
If you need more information regarding this item, please message us or check on original manfuacturers websites.
DREMC STORE back our products and pride ourselves, not only in quality but in genuine products. Please do not hesitate to reach out to us. We stock the largest range of 3D Printer Spares Parts, from Manufacturer such as E3D-Online, Creality, Slice Engineering, Bondtech, Micro Swiss, LDO Motors, Bigtreetech, Trianglelabs to name a few.
We are the largest Australia Creality Spare Part Distributors based in Brisbane, we stock over 200 SKUs Creality Printers spares parts. Our website store.dremc.com.au for latest stock list and accurate real time stock counter, no hidden stock levels.
Do you need bulk spare parts or DREMC / Polymaker filament discount? Message us now if you require B2B/Educational payment terms.
Please check out our response to see what others are saying about us.
× × × × × × × × ×
Tell a friend Visit store Watch now Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL/CARD
Please refer to Checkout for available payment method.
Price include GST. Message us if require a tax invoice.
Additional Information
No additional information at this time
Ask seller a question
You might also like BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board for Ender 3 Series Ender 5 Titanium Alloy Bi-Metal Heatbreaker For ANYCUBIC Mega S / Mega Pro / Vyper Trianglelab CR6 SE Titanium alloy Bi-Metal Heat break For CR-6 SE Ender 3 Neo Genuine E3D - Hemera HeatBreak Heat Break (Stainless Steel or Titanium) Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© DREMC STORE
Postage
Click the Postage tab above the listing description for more info
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
