TH Board Set v9 (Dual Red Laser) for Bambu Lab X1 and X1C

The Single Red Laser TH board is discontinued and has been replaced by the Dual Red Laser TH board.

The Dual Red Laser TH board works with the Dual Red Laser LIDAR.

Includes:
Extruder interface board v9 (1 pcs)
TH board FPC cable v9 (1 pcs)
Extruder TH board v9 (1 pcs)
M1_6-4 (4 pcs)
Glue (1 pcs)

Important Before ordering the TH board or micro lidar for X1C/X1, please determine their versions to avoid ordering the incorrect version, which results in compatibility issues.

If the Micro Lidar SN starts with 00ExxB, it means that the lidar is a dual red version, and the TH board should also be a dual red version with a serial number SN starting with 003xxC, 003xxD, or 003xxY.

If the Micro Lidar SN starts with 00Exx A , it means that the lidar is a single red version, and the TH board should also be a single red version with a serial number SN starting with 003xxA or 003xxB.

Fits:
Bambu Lab X1
Bambu Lab X1C

Note This is not compatible with the X1E

Learn more about the replacement of the TH Board Set V9 (Dual Red Laser) - X1 Series on Bambu Lab Wiki .

Please refer to the Wiki page here to check the version of your X1 Series TH board. There is no difference in functionality between the Dual Red Laser version and the Single Red Laser version.

Electronic item return policy