KNOMI product parameters:
1. 1.28-inch circular color LCD screen
2. Screen resolution up to 240 * 240
3. Pixel density of approximately 257 PPI
4. Screen brightness up to 400 Cd/m ²
5. Full view perspective
6. Integrated ESP32 MCU
7. Supports 802.11 b/g/n communication protocol with speeds up to 150Mbps
8. Support power supply in the range of 5-24VPrecautions for use:
1. The printer needs to use Klipper firmware;
2. Use a voltage range of 5-24V to power the KNOMI;
3. Ensure that KNOMI and the printer are connected to the same WiFi address in the same network environment;
4. To switch to a new network environment or connect to a new printer, it is necessary to reconfigure the network for KNOMI;
5. Long press and hold the KNOMI upper left button to manually enter the KNOMI network configuration interface.
KNOMI quickly and easily grasps the operating status and data of the printer through the KNOMI UI, such as hot bed temperature, nozzle temperature, leveling status, printing progress, etc.
KNOMI is an open source product that allows users to customize the user interface, design installation brackets, and adapt to their 3D printers. Reserve Type-C port for customers to DIY burn and use on their own, making it more versatile.
Communication through Wi Fi reduces the constraints of installation location; Easily install on Voron StealthBurner using the printed file provided by ; Design for Klipper firmware.
Support DC5V-24V input, convenient power supply, and simple wiring; Adopting a full view screen, you can see real colors from any angle.
BTT KNOMI can be connected to the motherboard through EBB SB2240/SB2209 CAN, maintaining the product form of StealthBurner while making the extrusion head of the printing machine intelligent.