Do not buy if you do not know what DTF is. INSTRUCTIONS: This product works from the inside of a printer. To deliver it into the printhead, you can try these methods: Step 1. Delive the liquid Option 1. Using a cartridge: fill an empty cartridge with the solution and use the printer's built-in function to clean the printhead three times. Option 2. Flushing with the included tube. You can use a flushing tube (included) to push the liquid inside the printhead. However, this is a more aggressive method and may damage the printhead if pushed too hard. 2) Wait 3 hours. Leave the solution in the printer for 3 hours. 3) Replace the solution. Refill the printer with regular ink, do 3-5 printhead cleanings. If the problem persists, repeat. Warning: This product is NOT a solvent cleaner/thinner. Please do not use it for solvent, eco-solvent, and UV inks. Please do not leave it at 100% concentration inside a printer for more than 24 hours. The solution can be left longer at a lower concentration (mix with ink). You can dilute this solution at any ratio. For example, a 30% dilution = 24 hours max. You can add a low percentage cleaning solution to the ink for regular wet-capping. For example, if you want to leave the printer idle for seven days, you can add 1 ml of cleaning solution to the damper and 1 ml to the capping station. Do not heat it. Use it at room temperature. The protective coating ingredients in the solution will evaporate at a temperature > 95 F. Put the lid back while not using it. Do not put this solution into other bottles. The bottle is specially designed for this solution to be effective.
Dissolve stubborn clogs and restore dried print nozzles. The only cleaning solution work from the inside of the printhead. Work with all DTF ink colors, but our target is to unclog the stubborn white ink. CAUTION. THIS PRODUCT IS FOR PROFESSIONAL USE ONLY! An industrial-strength printhead cleaner to remove white ink clogs. There is no paper instruction in the package. Scroll down and see instruction in product description. Please do not leave it at 100% concentration inside a printer for more than 24 hours. Do not put this solution into other bottles. The bottle is specially designed to keep the solution effective. Content: 100 ml Cleaning Solution for DTF and Pigment Ink. 1x 10 ml syringe. 1x Flushing Tube