Wire length: Supports customization of 20-60cm length, welcome deep cooperation.
Compatible graphics card: NVIDIA RTX50 series; AMD RX90xx series, new PCIe 5.0 graphics card
Speed and bandwidth: PCIe 5.0 x8 Gen5 256Gbps
Procurement reminder: It is necessary to purchase 1-2 samples for testing and verification before making bulk purchases.

1、 The advantage of the wire is that ADT has independently developed and designed the 5th generation anti-interference low resistance wire with a scratch resistant and wear-resistant outer sheath, and supports stable transmission of PCIe 5.0 at high frequencies.
2、 Line length advantage, customization is accepted from 30cm to 60cm. Please contact customer service for customization.
3、 The product is made of high-quality materials, with precise PCB craftsmanship. The PCB is made of high TG board, and the copper material thickness is thickened to 1oz, with gold fingers sunk in gold.
4、 The wire used in the product is already very durable. Aluminum alloy gaskets with a thickness of up to 2mm are used to protect the metal welding points, and screws are locked and fastened. The product is sturdy, reliable, resistant to pulling, anti-interference, and will not have problems such as breakage or nail drop. The wire can be bent and folded without affecting its use.
Summary of Technical Issues:
Laboratory test results?
Tested with nVidia RTX 5070 and AMD RX9070, both can achieve PCIe 5.0 x8

There is a metal layer shielding, using advanced EMI shielding conductive polymers, new materials for EMI shielding, and flat cable design. This technology allows each cable to be completely covered by electromagnetic interference shielding of conductive polymers to prevent incident or outgoing emissions of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of cables.

The wire is the fifth generation PCIe dedicated black thin wire independently developed by ADT, with a thickness of 0.8mm. The wire is very soft and bendable, which does not affect use, but cannot be pulled or pulled.

There are three common problems with insufficient linear performance or abnormal functionality of graphics card extension:
1. Extension cable assembly error. The graphics card extension cable should be installed in the graphics card slot closest to the CPU, as other slots have poor performance
2. The gold fingers of the graphics card or the motherboard slot terminals have poor contact or oxide, causing slow and stuttering. The contact points of the gold fingers should be cleaned thoroughly
3. The motherboard and graphics card are aging, and it is not recommended to use extension cords for devices that are over 3 years old. If the equipment is aging or the signal is poor, please reduce the speed for use.