8W wifi amplifier 2.4GHz wifi booster long range wifi repeater for home
AB022 does not come with a power supply. The product supports three types of power supply:12V/1A power supply,5V rechargeable batteryandbattery power. You can choose the suitable power supply according to your needs.
Low-noise receive gain
Signal activity LED indicates
High Gain, High Value, High Performance
Maximum output power of 8000mW by the Booster
Plug-and-play, Easy installation, no driver needed
Ideal for increase the 2400-2500Mhz frequency devices
Increase the effective range and coverage area of your Wi-Fi network
Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow
The amplified wireless signal may even penetrate complex environments with many walls and obstacles
Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode Range: 2400-2500 MHz.
Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.
Frequency Response: ± 1dB over operation range.
Input Power: 3dBm (Min.)-20dBm (Max.).
Output Power: 8000mW/39dBm nominal
Connector: SMA Receptacle, 50 ohm.
Transmit Gain: 16-18dBm nominal.
Receiver Gain: 10-12dBm.
Receive Noise Figure: 3.0dBm nominal.
Operating Temperature: - 40 to 70 degree.
Operating Humidity: Up to 95% relative humidity.
Material: Cast Aluminum
INPUT:100-240V 0.3A
OUTPUT:12V 1.5A
Step 1: Remove the power supply of the wireless AP/Router
Step 2: Remove the antenna of the wireless AP/Router
Step 3: Use the standard RG316 feeder to connect the offerirectional amplifier RFIN and the antenna of the wireless AP/Router
Step 4: Rotate the antenna to the RFOUT port of the offerirectional amplifier
Step 5: Power the offerirectional amplifier first, then power the wireless AP/RouterPackage included:
1 x WiFi Amplifier
1 x Connector cable
1 x Power supply(Some models not)
1 x Manual
![Buy Now Buy Now](buy.gif)