High-Performance PCIe to SATA 3.0 Adapter

Unlock the full potential of your storage devices with this advanced PCIe to SATA 3.0 adapter, designed for seamless compatibility and exceptional performance.

Key Features:

• Broad Compatibility: Fully compatible with Serial SATA 3.0 specification and backward compatible with SATA 2.0 and SATA 1.0.
• PCI-Express Compliance: Compliant with PCI-Express v2.0 and backward compatible with PCI-Express v1.0.
• Versatile Support: Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i interfaces.
• FIS Based Switching: Supports FIS based port multiplier switch or command switching for enhanced performance.
• Multi-Speed Compatibility: Works seamlessly with SATA6G, SATA3G, and SATA1.5G hard drives.

Installation Guidelines:

The SATA interface mode of the PCIe to SATA 3.0 adapter operates in AHCI mode. To ensure proper functionality:

• Your system disk must be installed in AHCI mode on the motherboard prior to installation.
• If the system disk is confirmed to be in AHCI mode, simply insert the hard disk into the adapter and adjust BIOS settings to set the system disk as the primary boot device.

Troubleshooting Tips:

If you encounter issues such as failure to start or repeated restarts:

• Check for conflicts between the motherboard's hard disk interface and the adapter.
• Access the motherboard BIOS and disable the hard disk interface option if necessary, then save changes and restart to boot the system successfully.

This PCIe to SATA 3.0 adapter is your solution for enhancing storage capabilities while ensuring compatibility with a wide range of devices