DocumentWhat is this?The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.Input diameter is 1.75mm,Replacing the nozzles regularly will give you a better printing experience.What will I get?Fit for 3D Printer;Material: Hardened Steel;Screw Thread: M6;Nozzle Diameter: 1.0mm;Overall Size(LxD): 21x7mm/0.83x0.28inch;Fit Filament Diameter: 1.75mm;High temperature resistance: 500°C/932°F;Color: Black;Package Content: 5 Pcs x 1.0mm nozzles;Is there any advantages of the product?The nozzles kit contains stable materials, high thermal conductivity, high thermal conductivity enables the filament to be heated evenly,The nozzles can withstand high temperature up to 500°C/932°F, fast thermal conductivity, make printing more stable; surface process with good electrical conductivity and anti-corrosion and rust, greatly reducing the adhesion between the filament and nozzle, extrusion is smoother.How to use it?1.Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).2.After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.3.Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.What should I notice?After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.Do not touch the old nozzle and heating block during replacement to avoid burns.

• Filament Refills PLA Filaments Silver 1.75mm, 250mm for 3D Printing Pen, 40pcs USD 15.34
• Flat IC Chipset Thermal Copper Heatsink for CPU GPU 15 x 15 x 1.8mm 20pcs USD 21.57
• Electronic Radiator Heatsink for Stepper Motor,3D Printer 40x40x11mm Black 10pcs USD 24.36
• Electronics Cooler Heatsink for MOS GPU IC Chip Silver 15 x 9 x 5 mm 20pcs USD 15.91
• 5 Meter/16 Ft PLA 3D Pen/3D Printer Filament, 1.75 mm Transparent USD 15.15
• M6 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 10pcs USD 18.43

5 Pcs 1.0mm 3D Printer Extruder Nozzles (21x7mm) What is this?
The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.Input diameter is 1.75mm,Replacing the nozzles regularly will give you a better printing experience.What will I get?
Fit for 3D Printer;
Material: Hardened Steel;
Screw Thread: M6;
Nozzle Diameter: 1.0mm;
Overall Size(LxD): 21x7mm/0.83x0.28inch;
Fit Filament Diameter: 1.75mm;
High temperature resistance: 500°C/932°F;
Color: Black;
Package Content: 5 Pcs x 1.0mm nozzles;Is there any advantages of the product?
The nozzles kit contains stable materials, high thermal conductivity, high thermal conductivity enables the filament to be heated evenly,The nozzles can withstand high temperature up to 500°C/932°F, fast thermal conductivity, make printing more stable; surface process with good electrical conductivity and anti-corrosion and rust, greatly reducing the adhesion between the filament and nozzle, extrusion is smoother.How to use it?
1.Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2.After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
3.Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.What should I notice?
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.Do not touch the old nozzle and heating block during replacement to avoid burns.Hot Item

• 8.5x8.5x11mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Black 20 PcsUSD 9.92
• 1.75mm Filament TPU Blue 0.25KG Dimensional Accuracy +/- 0.05mm for 3D PrinterUSD 34.22
• M6 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 5pcsUSD 16.91
• MK8 Drive Gear Direct Extruder Drive 5mm Bore for Extruder 5pcsUSD 18.23
• 14x14x6mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 24 PcsUSD 9.2

Payment

• We accept payment.
• Please do not email us to ask for other payment option.
• We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.

Shipping

• For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
• Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.

Return Policy

• If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.

About Us

• We are continually expanding our product selection to better serve your need.
• We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
• If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help Pcs 1.0mm 3D Printer Extruder Nozzles (21x7mm) What is this?
  The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.Input diameter is 1.75mm,Replacing the nozzles regularly will give you a better printing experience.What will I get?
  Fit for 3D Printer;
  Material: Hardened Steel;
  Screw Thread: M6;
  Nozzle Diameter: 1.0mm;
  Overall Size(LxD): 21x7mm/0.83x0.28inch;
  Fit Filament Diameter: 1.75mm;
  High temperature resistance: 500°C/932°F;
  Color: Black;
  Package Content: 5 Pcs x 1.0mm nozzles;Is there any advantages of the product?
  The nozzles kit contains stable materials, high thermal conductivity, high thermal conductivity enables the filament to be heated evenly,The nozzles can withstand high temperature up to 500°C/932°F, fast thermal conductivity, make printing more stable; surface process with good electrical conductivity and anti-corrosion and rust, greatly reducing the adhesion between the filament and nozzle, extrusion is smoother.How to use it?
  1.Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
  2.After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
  3.Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.What should I notice?
  After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.Do not touch the old nozzle and heating block during replacement to avoid burns.
  • Filament Refills PLA Filaments Silver 1.75mm, 250mm for 3D Printing Pen, 40pcs USD 15.34
  • Flat IC Chipset Thermal Copper Heatsink for CPU GPU 15 x 15 x 1.8mm 20pcs USD 21.57
  • Electronic Radiator Heatsink for Stepper Motor,3D Printer 40x40x11mm Black 10pcs USD 24.36
  • Electronics Cooler Heatsink for MOS GPU IC Chip Silver 15 x 9 x 5 mm 20pcs USD 15.91
  • 5 Meter/16 Ft PLA 3D Pen/3D Printer Filament, 1.75 mm Transparent USD 15.15
  • M6 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 10pcs USD 18.43
  Hot Item
  • 8.5x8.5x11mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Black 20 PcsUSD 9.92
  • 1.75mm Filament TPU Blue 0.25KG Dimensional Accuracy +/- 0.05mm for 3D PrinterUSD 34.22
  • M6 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 5pcsUSD 16.91
  • MK8 Drive Gear Direct Extruder Drive 5mm Bore for Extruder 5pcsUSD 18.23
  • 14x14x6mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 24 PcsUSD 9.2
  Payment
  • We accept payment.
  • Please do not email us to ask for other payment option.
  • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
  Shipping
  • Usually we ship your order out within 24 hours in business day.
  • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
  • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
  Return Policy
  • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
  • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
  About Us
  • We are continually expanding our product selection to better serve your need.
  • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
  • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.