UBB Store

4 PCS TMC2130 V1.1 TMC2208 V1.2 TMC2130 V1.2 SPI Stepper Motor Driver Module For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

4 PCS TMC2130 V1.1 TMC2208 V1.2 TMC2130 V1.2 SPI Stepper Motor Driver Module

Price: CN $18.99

Description

Name: 4pcs TMC2130V1.1/TMC2130V1.2/TMC2208V1.2 Stepper Motor Drivers.

Package included:

● 4 * TMC2130 V1.1 or TMC2130V1.2(SPI) or TMC2208 V1.2 Stepper Motor Driver.

● 4 * Heat Sink.

● 1 * mode (v1.1) = JUMPER2 connect, capabitlity up tp 1.2A(RMS) continus coil current

Step/dir interface with up to 256 micristeps

SPI interface or CFG pins for configuration

Motor voltage: 5.5-45V

Logic voltage: 3.3-5V

Stealthchop- for quite operation and smooth motion

spreadCycle-highly dynamic motor control chopper

coolStep-current contril for engergy savings

stallGuard-sensorless motor load detection

dcStep-load dependent speed Mode (v1.2) = no jumper2, 4pin on is a new module that is optimized and upgraded to solve the problem that older drivers cannot choose to use the SPI working mode.

SPI working mode of TMC2130 V1.2 can directly select driver current, driver subdivision and other parameters through firmware, which makes these parameters more accurate.

Using sequexternal sequencers, it can greatly reduce the workload of the chip and effectively avoid problems such as running deviation, losting step and fault caused by the overload of the chip.

This module is similar to TMC2100, which will generate a lot of heat energy when it working. Therefore, heat sink and heat dissipation fan must be added to cool it down during the use, which reduce the occurrence of losting steps and running deviation

Note: This driver can only support SPI pay special attention to the direction, do not insert wrongly!!! 1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket. 2. Please pay attention to direction. 3. TMC class chip fever easily，so please must attach heat sink,the heat sink directly attached to the PCB. 4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988. And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.

TMC2208 V1.2:

TMC2208 single-axis stepper motor drive chip,

power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision; with patented technology spreadCycle ? high chopper frequency, dcStep ?, stallGuard2 ? stall detection technology, CoolStep ? current dynamic adjustment technology, can save 70% of the energy, StealthChop mute technology

Flexible microPlyer interpolation unit, the component can provide up to 256 microstep / step resolution, even in the pulse rate is limited system can still be perfect to achieve sinusoidal control; As stealthChop fine music technology is widely used in 3D printing,

So These components are also designed to be compatible with existing 3D printer electronics, eliminating the need for costly redesign. Both components have pulse / direction input, can be completely independent operation. The configuration is implemented via digital input

Payment

1. We accept payment via PAYPAL ONLY.

2. Payment must be made within 7 days of sale closing. (Non-payment may result in a UPI (Unpaid Item) being put onyour

account. willautomaticallyclose your account if you accumulate 4 UPI's total. ) If you placed an order you no longer

needed, you cancontact me to cancel.

3. Total Amount Due includes the final sale price plus S&H(Shipping and Handling).

4. S&H will be determined based upon the SHIP TO address.( S&H does not include customs or any other importationfees).

Shipping

1. Handling time: 3 business days.

2. Tracking number: "Economic shipping" without whole tracking information, "Standard shipping" with wholetracking

information.Wehighly recommend youto choose"Standard int'l shipping" to avoid package lossing issue.

3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekend and holiday. Transit time may vary,particularly

during the holiday season.

4. The estimate shipping period of“Economic int'l shipping”is 36-60 days and if you have not received your shipment over60 days

from payment,please contactwith us.The estimate shipping periodof“Standard shipping” is 16-36 days and ifyou have

notreceived your shipment over 36days from payment, pleasecontact with us. We will track the shipmentandget back to you

as soon as possible. Your satisfaction is our the item is defective, please notify us within 3 days after you have received the goods.

We maintain high standards of excellence and strive for 100% customer satisfaction! Your positive response is important to us.

Please contact us first before you leave Neutral or Negative response. We will do our best to solve the problem, thanks!

1. Your better response will be an encouragement for us to offer the better quality and the better service in future.

2. If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within

1- 2 businessday.We shall try our best to solve your problem to your satisfaction.