• Store
• New Arrivals
• Add to Favorite
• View response
• Contact

11Dbi High Gain 2X2 MIMO Panel Antenna for 4G LTE & 5G Cellular Hotspots, Routers, & Gateways, T-Mobile Home Internet, Verizon, AT&T, T-Mobile Telus, Bell Cell Signal Booster,Description Item Weight 3.19 pounds Color Dual SMA Connector Antenna Product Dimensions 7.1"L x 2.7"W x 11.5"H Country of Origin China Maximum Range 5 Meters Impedance 50 Ohm

• Frequency Range: 698 - 2700 MHz; Gain：11dBi; Direction: Directional; Antenna Cable Length: 2x5 Meter RG58 Cable; ; Antenna Connector：Dual SMA Male（pin inside）;Impedance: 50 ohm
• Works on 4G LTE, 5G Modems, GSM & CDMA Cellular Hotspots Routers, Compatible with Verizon, AT&T, T-Mobile, Telus, Bell Canada, Rogers and Other 4G LTE Carriers.
• The MIMO Panel Antenna Kit by Eifagur with up to 11dBi of gain over 600-2700MHz to give your LTE modem or hotspot the speed it deserves.Each antenna compared to what the small internal antennas of your router can currently pull from a tower, maximizing the efficiency of your device. antennas gives you double the signal being sent and received into the device rather than a single channel of data；
• EASY TO INSTALL: Designed for exterior installation, the 4g antenna from features a rugged waterproof structure that's designed to withstand damage from the elements.This package includes two U-bolt brackets for 1.5- to 2- inch pipe or mast.It can easily be set up in an outdoor space including home rooftops, utility poles, surveillance trailers, office and anywhere else you want.
• Especially suitable for Mofi 4500 Mofi 5500 Cradlepoint IBR900 and other routers that support Multiple Input Multiple Output (MIMO).
• Don't worry about any problems, we have carefully checked each product, we are willing to provide 30 days free replacement and Free return,100% Satisfaction Guarantee.

Product Description Material And Parts

• Reflector Material:Aluminum Alloy
• Radome Material:Waterproof ABS
• Parts included:Mounting Bracket U-bolt washers and screws
• Easy Installation

Dual Polarized Directional LTE MIMO Antenna Ideal for signal enhancement in cellular application

• Dual cross-polarized 75 degree transmitting and receiving,enabling connection to distant cell towers for LTE resulting in higher performance.
• ABS+ Aluminum rugged housing ,heavy duty mounting hardware and corrosion-resistant materials are ideal for outdoor applications.
• Works on 3G, 4G, LTE, GSM & CDMA cellular services, includes Sierra Wireless Verizon AT&T,Netgear Sprint,Novatel Wireless Verizon.

Specifications Gain 11dBi Frequency Range 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz VSWR < 1.8 Impedance 50 ohm Direction Directional Beam Width Hz. 70/75 deg, Vrt. 75/60 deg Polarization Vertical + Horizontal Feature Fixed Wall Mount Antenna connector Dual SMA male Antenna Cable Length Dual 16.4foot (5M) RG58 low-loss coax cable Operating Temperature -20°С ~ +80°С Storage Temperature -30°С ~ +85°С Directional Antenna Installation Tips

• Please turn off the power of the signal equipment before use, and then connect the antenna.
• Determine location of nearest cell tower.
• Mount antenna to 2.0 inch max diameter mast or to wall as high as possible.
• keep the antenna facing the signal tower.
• Adjust antenna position left/right and up/down tilt to find optimal signal.
• Point away from：other antennas,trees & buildings,large vertical metal or concrete objects.

Note

• Use 50 Ohm RF coax cables. DON’T Use RG59/RG6 coax (75 Ohm cable) – signal will be seriously degraded
• This antenna is for direct-wired connection to cellular data devices with 2 antenna connectors.Keep cables as short as possible.DON’T Use a splitter to connect 1 modem port to both antenna leads.
• This directional antenna(one plastic side) must be pointed toward a cell tower.In order to get a better signal, please keep the antenna facing the signal tower as free of obstacles and high enough.