FeaturesAutoCross™: Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.Automatic Link Restoration: The medio converters will automatically re-establish link in all network conditions.Selectable speed setting: The converter can be set to 10Mbps or 100Mbps. Both copper and fiber ports are automatically set to the same speed. Devices connect to duplex mode of link partner.Key Features

• 10/100Mbps auto-negotiation
• Supports IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control
• Supports MAC self-learning
• Standards: IEEE802.3, IEEE802.3u, IEEE802.3x, 10/100Base-TX, 100Base-FX, 10/100/1000Base-TX, 1000Base-FX/LX
• LED status of Link, activity, Full/half duplex, speed and power on diagnostic function
• Extremely low power consumption and low heat
• Reliable and stable Ethernet Network DistancesIt use the 10BASE-T to 10BASE-FL speed setting (back-to-back) to extend the distance between two 10BASE-T devices up to 100km. using single mode fiber without a repeater.Extend Fast Ethernet Network DistancesIt use the 100BASE-TX to 100BASE-FX setting to extend the distance between any two 100BASE-TX devices up to 100km. using single mode fiber. Or interface directly with a 100BASE-FX compliant port on any device to provide a 100BASE-TX port interface.