UBB Store

original Bambu Lab Complete Hotend Assembly - X1 P1 not for X1E Series 0.2/4/6/8 For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

original Bambu Lab Complete Hotend Assembly - X1 P1 not for X1E Series 0.2/4/6/8

Price: CN $45.00

Highlights of Various Nozzle Diameters0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

The 0.4mm nozzle is widely recognized as thestandard nozzle diameterfor modern 3D printers due to itsoptimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1Series 3D printers.

Filament CompatibilityMaterial0.2 mm Nozzle0.4 mm Nozzle0.6 mm Nozzle0.8 mm NozzleHardened Steel Required?General PLAYESYESYESYESOptionalPLA Sparkle*NOYESYESYESOptionalPLA PLA-CF*NO*Highly
[*Note]

Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a0.2 mm nozzle.
For filaments containing carbon fiber or glass fiber, it ishighly recommendedto use ahardened steel0.6 mm nozzleto minimize the risk of clogging and abrasion.
Bambu PLA-CFandBambu PETG-CFhave been extensively tested and proven to have a low risk of clogging when printed with ahardened steel 0.4 mm nozzle, while also achieving higher print quality.

Learn more about filament compatibility onBambu Lab Wiki.

Configuration of Bambu Hotend
If you need toswap your nozzle, you can either replace theHotend with Nozzleon your original complete hotend assembly orreplacethe wholeComplete Hotend Assembly.

allowfullscreen="" frameborder="0" style="-webkit-font-smoothing: antialiased; box-sizing: border-box !important; position: absolute; top: 0px; left: 0px; width: 1290px; height: 725.625px; max-width: 100%;">
Learn more about replacing the complete hotend assembly onBambu Lab Wiki.
In the Box

- Complete Hotend Assembly - X1 Series
- M3-14 Step Screws * 2

Compatibility

X1 and X1C (not for X1E)

Product SpecificationsMax. Printing Temp.300 ℃Length47.3 mmPackaging Weight40 gPackaging Size190*70*50 mm