Reliable Ultimaker 2+ with spare parts & filament. See summary of parts below. This machine has been a true work horse and requires minimal maintenance. I lubricate the ball screw and the x/y rods and clean the extruder gears. Beyond that and the occasional bed leveling, there hasn't been a need for much else. I largely do functional prints, but as with most printers, at lower speeds and layer heights, print quality is good (see images). The following items are included:- Ultimaker 2+- Spare extruder assembly- Spare gantry head, capable of dual nozzles (full assembly including fans, bearings, heating element, etc.)- User manual- Miscellaneous OEM spares (Bowden clips, alignment jigs, etc)-Spare unused nozzles (2x0.4mm,1x0.2mm,1x0.6mm,1x0.8mm)- Spare OEM servo- User manual- Printed filament holder (OEM holder too short for some 1kg rolls)- 1 kg of un-opened black PETG & ~ 250 g of translucent purple PLA Prime (both virgin material from my favorite manufacturer of 2.85 mm filament, stored with desiccant in low humidity climate)
Although it isn't a functional issue, this printer can make a creaking sound while printing, as is apparently common with these machines. I've had some luck by re-tensioning belts, but from what I've read replacing the belts will likely resolve the issue. The noise can be heard in the attached video.