Printium UV DTF Ink – CMYK + White + Varnish | UV LED Curable Pigment | 500ml / 1L | L805 1390 XP600 i3200 TX800 i1600 DX4 DX5 DX6 DX7 DX10 PRINTIUM ✦ UV DTF Ink System · CMYK + White + Varnish UV DTF Ink — Full Color Set
CMYK + White + Varnish 500 ml (16.9 fl oz) or 1L (33.8 fl oz)
Professional UV LED curable pigment inks for the complete CMYK+W+V workflow. Select your color and size. No heat press required — cures under UV LED lamps for waterproof, scratch-resistant transfers on glass, metal, wood, acrylic, ceramic, and plastic.
6 Colors Available 2 Sizes: 500ml / 1L UV LED Curable 100% 5-Star Reviews CMYK+W+V Full Channel Set UV LED Cure No Heat Press Waterproof Scratch-Resistant Clog-Free Flow Finely Filtered Hard Surfaces Glass · Metal · Wood Choose Your Color 6 Colors — Every Channel Covered
⬜ White (W) — Underbase
High-opacity TiO₂ underbase that makes CMYK colors pop on dark, transparent, and metallic surfaces. Shake well before use — titanium pigment settles. Works in W and white channels.
🖤 Black (K) — Process Color
Deep, neutral black for dense shadows, razor-sharp text, and wide color gamut. Shake gently before filling. Works in CMYK and K channels.
🔵 Cyan (C) — Process Color
Bright, accurate cyan for clean sky blues, smooth gradients, and precise secondary colors. Stable, streak-free jetting for consistent sky tones across long runs.
🔴 Magenta (M) — Process Color
Vivid, punchy magenta for saturated reds, pinks, and accurate skin tones. Consistent, low-clog flow keeps reds and skin tones repeatable from first print to last.
🟡 Yellow (Y) — Process Color
Clean, brilliant yellow for accurate greens, oranges, and crisp highlights. Smooth, reliable low-odor flow prevents hue shifts that affect secondary color accuracy in long runs.
✨ Varnish (V) — Clear Gloss
Clear gloss top coat that seals every transfer with a smooth, glossy layer — deepens color, boosts adhesion, and protects against daily wear, scuffs, and water exposure.
Choose Your Size 500 ml or 1 Liter — Pick What Fits Your Volume SizeVolumeBest For 500 ml16.9 fl ozTesting new setups, topping off low tanks, backup supply, occasional printing 1000 ml (1L)33.8 fl ozDaily production, high-volume shops, lowest cost per print Why Choose Printium UV DTF Ink Built for UV DTF Production
01 Fast UV LED Cure
Every color sets quickly under UV LED lamps into a tough yet flexible layer that grips the transfer film for clean cold-peel application and crisp, sharp edges. No heat press, no powder, no curing oven.
02 Clog-Free, Even Flow
Finely filtered formula jets consistently across long runs. Low-odor pigments maintain stable drop placement — no banding, no nozzle dropout, no streaking across the roll.
03 Waterproof & Durable Output
Cured transfers are waterproof, scratch-resistant, and hand-wash friendly — suitable for tumblers, mugs, glass, metal, wood, acrylic, ceramic, and plastic surfaces.
04 Complete CMYK+W+V System
All six colors — Cyan, Magenta, Yellow, Black, White underbase, and clear Varnish — are formulated to work together in the same CMYK+W+V printing sequence for true-to-design color output.
05 Wide Printer Compatibility
Designed for L805/1390 converted systems and UV DTF sticker printers using XP600, i3200, TX800, i1600, DX4, DX5, DX6, DX7, DX10, or similar printheads — flatbed and roll-to-roll.
06 Professional Bottle Sizes
Available in 500 ml (16.9 fl oz) for testing and backup, or 1L (33.8 fl oz) for daily production. Each sealed bottle refills easily for a low cost per print.
Technical Details Full Specifications SpecificationDetail BrandPRINTIUM Available ColorsWhite (W) · Black (K) · Cyan (C) · Magenta (M) · Yellow (Y) · Varnish (V) Available Sizes500 ml (16.9 fl oz) · 1000 ml / 1L (33.8 fl oz) Ink TypeUV LED Curable Pigment Ink Cure MethodUV LED lamp — no heat press required ApplicationUV DTF direct-to-film printing Compatible PrintersL805/1390 converted systems · UV DTF sticker printers with XP600, i3200, TX800, i1600, DX4, DX5, DX6, DX7, DX10, or similar printheads — flatbed and roll-to-roll Output SurfacesGlass · Metal · Wood · Acrylic · Ceramic · Plastic · Tumblers · Mugs · Bottles Output PropertiesWaterproof · Scratch-Resistant · Hand-Wash Friendly White Ink NoteShake well before each use to re-suspend TiO₂ pigment CMYK / Varnish NoteShake gently before filling to ensure even pigment distribution ConditionNew Compatibility Compatible Printer Systems
Epson L805 Converted Epson 1390 Converted XP600 Printhead i3200 Printhead TX800 Printhead i1600 Printhead DX4 Printhead DX5 Printhead DX6 Printhead DX7 Printhead DX10 Printhead Flatbed UV DTF Systems Roll-to-Roll UV DTF Systems UV DTF Sticker Printers
Instructions How to Use
- 1 Prepare the Ink
Shake White ink well before filling to re-suspend TiO₂ pigment. For all other colors (CMYK and Varnish), shake gently to ensure even pigment distribution.
- 2 Fill the Correct Channel
Fill your printer's channel with the matching ink color. Ensure ink lines and dampers are clean before filling to prevent contamination or color mixing.
- 3 Print Your Design
Load UV DTF film and print using your UV RIP software with the correct CMYK+W+V color profiles. The white underbase layer prints first, followed by CMYK colors, then the varnish gloss coat.
- 4 UV LED Cure
Pass the printed film under UV LED lamps. Each layer cures into a tough, flexible coating that grips the transfer film — no powder, no curing oven, no heat press required.
- 5 Laminate, Cold Peel & Apply
Laminate with the B-film, then cold peel and apply the transfer directly to the substrate — glass, metal, tumbler, mug, wood, acrylic, ceramic, or plastic.
- 6 Seal & Store
After use, seal the bottle tightly and store in a cool, dark place away from UV light sources. Shake before each refill session to maintain consistent pigment suspension.
Questions & Answers Frequently Asked Questions What colors are available and which size should I choose? Six colors are available: White (W underbase), Black (K), Cyan (C), Magenta (M), Yellow (Y), and Varnish (V clear gloss). Each comes in 500 ml (16.9 fl oz) for testing, backup, or occasional use, and 1L (33.8 fl oz) for daily production and the lowest cost per print. Select your color and size using the dropdown variations above. What is the correct printing order for CMYK+W+V UV DTF? The standard UV DTF printing sequence is: White underbase first → CMYK color layers → Varnish gloss coat last. The white layer creates the opaque foundation for colors on dark or transparent surfaces; CMYK layers build the design; and the varnish seals everything with a glossy, scratch-resistant finish that improves adhesion to the substrate. Do I need a heat press for UV DTF printing? No. UV DTF is a cold-peel system — designs cure under UV LED lamps (not heat) and are transferred to hard surfaces by pressing with a laminator or squeegee, then peeling. No heat press, no adhesive powder, and no curing oven are required. This makes it ideal for glass, metal, acrylic, and other heat-sensitive substrates. Why does White ink need to be shaken differently from other colors? White ink uses titanium dioxide (TiO₂) pigment, which is denser than the ink carrier and settles faster. It requires vigorous shaking before each use to fully re-suspend the pigment and ensure full opacity. CMYK inks and varnish use lighter organic pigments that only need a gentle shake to maintain consistent distribution. Which printers and printheads are compatible? Compatible with L805/1390 converted systems and UV DTF sticker printers using XP600, i3200, TX800, i1600, DX4, DX5, DX6, DX7, DX10, or similar printheads — both flatbed and roll-to-roll configurations. Works with white, CMYK, and varnish channels. What surfaces can UV DTF transfers be applied to? UV DTF transfers bond to virtually any smooth hard surface: glass, metal, wood, acrylic, ceramic, plastic, tumblers, mugs, bottles, phone cases, and signage. Unlike standard DTF printing, UV DTF is designed exclusively for hard surfaces — it is not suitable for fabric or textile applications. Order with Confidence
Professional UV DTF inks — same day shipping available on qualifying orders.
6 Colors 2 Sizes UV LED Fast Cure Waterproof Output DTFBANK × PRINTIUM
