UBB Store

Seagate BarraCuda 2TB 7200RPM SATA 3.5in HDD ST2000DM008 | 0 Bad Sectors | PASS
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Seagate BarraCuda 2TB 7200RPM SATA 3.5in HDD ST2000DM008 | 0 Bad Sectors | PASS
Price: US $29.99

Seagate BarraCuda 2TB 7200RPM SATA III hard drive (3.5 inch, 6Gb/s, 256MB cache), model ST2000DM008, pulled from a working system. Manufactured February 2022. Label is clean and fully legible. There is minor adhesive residue on the top cover near the label, visible in the photos that are cosmetic only. Drive only: no screws, rails, cables, or accessories included.


Fully tested before listing.


HEALTH REPORT (verified via smartctl)


SMART Overall .................. PASSED

Reallocated Sector Count ....... 0

Current Pending Sector ......... 0

Offline Uncorrectable .......... 0

Reported Uncorrect ............. 0

Runtime Bad Block .............. 0

End-to-End Error ............... 0

Spin Retry Count ............... 0

Command Timeout ................ 0

High Fly Writes ................ 0

G-Sense Error Rate ............. 0

UDMA CRC Error Count ........... 0

Error Log ...................... No Errors Logged

Power On Hours ................. 5,429

Power Cycle Count .............. 1,384

Start/Stop Count ............... 1,408

Load Cycle Count ............... 1,583

Power-Off Retract Count ........ 60

Temperature at Test ............ 36C (lifetime range 25C-41C)

Total Data Written ............. 26.7 TB lifetime

Total Data Read ................ 21.2 TB lifetime


Every failure-related attribute on this drive reads zero: no reallocated sectors, no pending sectors, no uncorrectable errors, no bad blocks, no spin retries, no command timeouts, no shock events, and no interface CRC errors. Load cycle count is low at 1,583, and the drive has never run hotter than 41C.


ABOUT THE LARGE SEAGATE NUMBERS


If you pull SMART on this drive yourself, you will see very large raw values on three attributes:


Raw Read Error Rate ............ 54,343,888

Seek Error Rate ................ 864,574,308

Hardware ECC Recovered ......... 54,343,888


These are not error counts. Seagate encodes a combined count of total operations and errors into these raw fields, so the raw numbers climb continuously through normal use on every healthy Seagate drive. The meaningful reading is the normalized value, which on this drive sits far

above the failure threshold (077 vs threshold 006 for read error rate, 089 vs threshold 045 for seek error rate). I am explaining it here because these numbers alarm people who have not seen Seagate SMART data before.


IMPORTANT -- THIS IS AN SMR DRIVE


The ST2000DM008 uses SMR (shingled magnetic recording), as disclosed by Seagate. SMR drives work well for desktop storage, backups, media

libraries, and general use. They are NOT recommended for ZFS pools, RAID arrays, or NAS setups that rebuild or resilver, where SMR write behavior can make rebuilds extremely slow or cause the drive to drop from the array. Please buy with that in mind.


SPECIFICATIONS

Brand .......... Seagate

Model .......... BarraCuda ST2000DM008

Part Number .... 2FR102-300

Capacity ....... 2TB

Form Factor .... 3.5 inch

Interface ...... SATA III 6.0 Gb/s

Rotation Speed . 7200 RPM

Cache .......... 256 MB

Recording ...... SMR

Firmware ....... 0001

Serial ......... ZFL63WFF

Manufactured ... 16 February 2022, Thailand


SECURE ERASE

Full-drive zero-fill overwrite completed, then verified with a full byte-by-byte read-back comparison: every byte on the drive was confirmed

to read as zero, start to finish. This drive has zero reallocated sectors, so there are no retired sectors outside the reach of the overwrite -- every sector on the drive has been overwritten. All prior data is destroyed. Drive ships blank.


Shipping / Arrival Inspection:

If the package arrives with visible damage, please photograph the outer box, packing materials, and item before testing or installing it. Please keep all packaging until the issue is resolved, as the carrier may require it for an insurance claim. If there is any issue with the item on arrival, please contact me through messages so we can document everything properly and work toward a fair resolution.


Returns:

Returns are handled through according to the return policy shown on this listing. Please contact me through messages if there are any

issues.


Feel free to message me with any questions before purchasing!



Buy Now