This cable allows you to connect 4 SAS disks in SFF-8482 format to a SlimSAS SFF-8643 interface present on a controller card. 
The SFF-8643 interface exclusively carries data signals without a power supply, this cable integrates two dedicated 15-pin SATA power ports, essential for correctly powering the connected SAS drives. 
An 8 pin Sideband interface is also present if required it can be left 12Gb/s SAS SSD with 29-pin SFF-8482 connector.
Compatible with RAID cards, HBAs and SAS controllers equipped with a SlimSAS SFF-8643 port.

Technical characteristics:
SlimSAS to 4 x SAS SFF-8482 breakout cable.
Host side connector: 1 x SlimSAS SFF-8643 male.
Device side connectors: 4 x 29-pin male SFF-8482 for SAS devices.
Additional power supply via 2 15-pin male SATA power connectors.
Sideband 8-pin auxiliary connector.
Main data beam length 80 cm.
Length of SATA power cords 25 cm.
Support 12Gb/s SAS protocol per channel depending on the hardware used.
Low signal attenuation for optimal data integrity.
High quality professional Amphenol connectors.
Direct hardware installation without drivers or software.

Important :
SATA power is required for drive operation via this interface.

This cable allows you to connect 4 SAS disks in SFF-8482 format to a SlimSAS SFF-8643 interface present on a controller card.  The SFF-8643 interface exclusively carries data signals without a power supply, this cable integrates two dedicated 15-pin SATA power ports, essential for correctly powering the connected SAS drives.  An 8 pin Sideband interface is also present if required it can be left unused. Compatible 12Gb/s SAS SSD with 29-pin SFF-8482 connector. Compatible with RAID cards, HBAs and SAS controllers equipped with a SlimSAS SFF-8643 port. Device side connectors: 4 x 29-pin male SFF-8482 for SAS devices. Additional power supply via 2 15-pin male SATA power connectors. Support 12Gb/s SAS protocol per channel depending on the hardware used. SATA power is required for drive operati