PCIe x8 with Re-Driver to Oculink 8i Add-in-Card PCIe Gen 4
Features :
• OCulink 8i (SFF-8612) to PCIe x8 Gen 4 convert
• Built-in OCulink 8i (SFF-8612) connector, pin-out defined by SFF-9402 Rev1.1
• Built-in ReDriver to extend PCIe 4.0 8 Lanes signals reach.
• Built-in PCIe 100MHz Clock buffer, default Zout=100 ohm to drive longer trace length and longer cable length.
• Built-in PCIe SMBus Switch(Address 0xE2) 4-channel with Reset Function for OCulink 8i (SFF-8612) SMBus and PCIe 100MHz Clock buffer SMBus control
• Built-in PERST# Bus Buffer Gate to be used over longer trace lengths and over longer cable length.
• Built-in WAKE# Bus Buffer Gate to be used over longer trace lengths and over longer cable length.
• Built-in CLKREQ# Bus Buffer Gate to be used over longer trace lengths and longer over cable length.
• Built-in PWRBRK# Bus Buffer Gate to be used over longer trace lengths and longer over cable
• D1 Green LED on indicates AIC ready
Specifications :
• PCI Express Base Specification Rev 4.0
• Compliant with Support SFF-9402 Rev1.1
• Compliant with Sysytem Support :
• Windows 8 &8.1
• Windows 10
• UEFI 2.3.1 or later
This unit can be used with Micro SATA Cables Part #SLM-1957-8I
PCIe Gen 4 SlimSAS (SFF-8654) 8i to OCulink (SFF-8611) 8i Cable
This unit can be used with Micro SATA Cables Part #SLM-1869-U3
SlimSAS 8i(SFF-8654) PCIe 4.0 to U.3 Dual port with +12V Hot Swap Power Controller for PCIe x8, x16 Add-in Card
Micro SATA Cables PN # OCU-1884-8I