PCI-E 4.0 x4 x8 to x16 Riser Cable Gen 4 PCIe x4 64G/bps PCIe x8 128G/bps Adapter Cable for RTX3090 RX6800xt GPU Extension Cable

Product Name: PCI-E 4.0 x4 to x16 Graphics Card Extension Cable

Cable Length: 15cm, 25cm

Applicable graphics cards: RTX3090 RX6800xt, support PCIE 4.0 graphics cards

Bandwidth speed: PCIe 4.0 x4 gen4 64G/bps (Max.)

Use restrictions: PCIe 4.0 on the equipment requirements are high,

as long as the signal is connected to the extension cable will be attenuated,

this product does not guarantee PCIE 4.0 full speed, equipment aging,

poor signal or bad environment, please reduce the speed of use.

Purchase Tip: Please be sure to buy 1-2 samples for testing before buying in bulk.

Friendly reminder: this item is compatible with many problems,

incorrect assembly not improper operation will burn your device!

Cable Length Note: The cable length refers to the visible part of the cable,

excluding the PCB as well as the Name: PCI-E 4.0 x8 to x16 Extension Cable

Cable length: 15cm, 25cm

Bandwidth speed: PCIe 4.0 x8 gen4 128G/bps

Use restrictions: PCIe 4.0 on the equipment requirements are high, as long as

the signal is connected to the extension cable will be attenuated,

this product does not guarantee PCIE 4.0 full speed, equipment aging,

poor signal or bad environment, please reduce the speed of use.

Purchase Tip: Before buying in bulk, please be sure to buy 1-2 samples for testing.

Friendly reminder: this product is compatible with a lot of problems,

incorrect assembly not improper operation will burn your device!

Cable Length Note: Cable length refers to the visible part of the cable,

excluding the PCB and Advantage:

1.Cable advantage, ADT self-developed fourth-generation high-speed cable with shielding,

using high-quality connectors, high-frequency support for PCIe 4.0 x4 64G/bps or PCIe 4.0 x8 128G/bps stable transfer.

2. Cable length advantage, from 5 cm to 1 metre can be accepted to order, this adapter cable,

low cable impedance, 60cm or less cable length can be stable to support PCIe4.0 full speed.

3. Differential signals without over-hole design, there is no parasitic capacitance and parasitic

inductance of the signal attenuation interference problems, not to mention the

CAF micro-short phenomenon, product durability.

4.PCB selection of high-frequency low-resistance high-quality materials, PCB precision workmanship,

PCB using high TG plate, copper thickness thickened to 1oz, gold-plated gold finger content,

gold-plated enough conductivity is good to reduce the oxidation of rust and impedance caused by

the impedance of elevated dead broken sound problems.

5. Product selection of the wire itself is very durable, the use of metal at the welding point thickness

of 3mm PCB spacer protection, and lock the screws and hexagonal nut fastening, the product is strong

and reliable resistance to pulling, anti-interference, there will be no breakage of the line off the nail problem.

6.PCB dwarfing and fat design, dwarfing will not be stuck to the card, fat and long design to

make the board easier to install, reduce the chance of Question Summary:

What is the quality of the wire? Is it shielded?

There is a metal layer shielding with advanced EMI shielding conductive polymers,

a new type of material for EMI shielding and a flat cable design.

This technology allows each cable to be completely covered by the conductive polymer

EMI shielding to prevent incoming or outgoing emissions of electromagnetic frequencies,

minimise interference and performance degradation, and reduce the weight of the cable.

Wire thickness? Soft? Bendable?

The wire is ADT fourth generation PC Ie special wire, black model wire thickness is 1.3mm,

silver model wire thickness is 1.4mm, the wire can be bent or folded, does not affect the use.

Purchase notes:

1 . When plugging the line must be clear direction, do not plug the reverse or plug the offset,

to prevent burning equipment, plug the line first hold the equipment socket and then plug the line,

to avoid excessive force will be socket pin plug off. The second end of the wire and the circuit

board welding within 2cm prohibited bending prohibit pulling.

2 . A variety of motherboards and equipment signal drive ability and other conditions are not the same,

our test results do not guarantee the same test results and you, as long as it is connected to the

extension cord, the signal will have loss, there will be compatibility issues.

3 . Graphics card or motherboard is an electronic device will increase with time and aging oxidation,

and then connected to the extension cable will only be more unstable.

This product does not support old devices,

if your device is more than three years or more, please do not buy.

4 . Restricted to product engineers specified purchase,

only for product testing, other uses, please do not