Product Description
Before applying power, please check the input voltage (230V115V required) and adjust it to meet your need, to avoid damage to the machine.
Before applying power, please check that the three platform board fixing screws have been removed to avoid damage to the machine.
Creality K1
600mm/s Max Speed
20000mm/s² Acceleration
32mm³/s Max Flow Hotend
Hands-free Auto Leveling
Self-test with One Tap
Solve Ringing with G-sensor
Unibody Die-cast Frame
Auxiliary Cooling Fan in Chamber
300℃ High-temperature Printing
Upgraded Klipper Firmware & Core XY
Always Print at Full Speed
With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03s, delivering full speed in 90% of the printing time. K1 is 12 times faster than a regular FDM 3D printer.
Nimble Setup for Speed
K1 combines the nimble Core XY with a 190g lightweight printhead for less motion inertia. Agile and swift.
32mm³/s Flow in Full Blast
New ceramic heater, encircling the entire hotend. It heats to 200℃ in 40s and melts the filament instantly. Dual-gear direct extruder, delivering 50N strong extrusion force. Hotend with a titanium alloy heatbreak and a copper alloy nozzle, working with flying colors in up to 300℃.
Model Cooling by Dual Fans
A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too. The model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.
Creality Print 4.3 with Speed Genes
The latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.
Speedy Creality OS and Hardware
K1 adopts the smart Creality OS. It features a straightforward UI, and syncs data and commands with PC, phone, Cloud, and add-on modules. The snappy dual-core 1.2GHz CPU powers high-speed printing with ease. The 8G ROM stores up to 400 model files and enables quick writing and reading.
Connected and Carefree Control
K1 can print via USB drive or WiFi. With a network connection, K1 can be controlled remotely from Creality Print or Creality Cloud APP/WEB. Cluster control is also allowed when many K1 printers are online. Once the printing is complete or abnormal, a notice will be sent to your phone or PC.
Hands-free Auto Leveling
An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention.
Self-test with One Tap
Give a tap, and Kl will self-test the extruder,heatbed, camera (optional), fan, leveling, etc. Any abnormality detected will prompt on the display. So, users can proceed confidently without hitch.
Flexible Build Plate
Sticky and heat-resistant, it works well with a wide range of filaments. The finely frosted surface makes the model bottom fine and smooth. Bendable for quick print removal.
Quick-heating Heatbed
The aluminum alloy heatbed spreads heat uniformly and quickly. It reaches 60° in only 180s.
G-sensor & upgraded Z-axis for delicate model texture
A G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it. No more ghosting or ringing on the print. And the upgraded Z-axis with more accurate positioning reduces Z-banding effectively.
Creality K1 FAQ:Build volume of Creality K1.The build volume of the K1 is expected to be 220 x 200 x 250mm with the K1 Max expected to be 300 x 300 x 300mm.How much fast is the K1 ?The Creality K1 is 12x faster than a standard FDM 3D printer boasting print speeds of up to 600mm/s. This impressive performance significantly reduces printing times and enhances overall efficiency compared to conventional 3D printers. A standard benchy usually takes 1h 30 min to print but with the K1 this is achieved in 13 minutes.Materials compatibilityThe Creality K1 3D Printer is a highly versatile machine that can cater to varying applications and creative projects. This printer can print with an extensive range of filaments like ABS, PLA, TPU, PET, PETG, PA (Nylon), ASA, PC (Polycarbonate), PLA-CF (Carbon Fiber Reinforced PLA), PA-CF (Carbon Fiber Reinforced PA), and PET-CF (Carbon Fiber Reinforced PET). This wide selection of materials available allows users to experiment and achieve the desired outcomes.Multi-material print support?Although the Creality K1 is a powerful machine with a single extruder that allows printing with a wide array of filaments, it does not offer multi-material printing like the Bambu Lab X1 Carbon with AMS system. The K1 lacks a dual or multi-extruder setup, which is essential for printing with multiple materials simultaneously in a single print job.
