Lite-On 256GB SATA 6Gb/s M.2 2280 Client Mobile & Desktop Solid State Drive

Model: CV1-8B256-HP | Series: CV1 | Form Factor: M.2 2280

The Lite-On CV1-8B256-HP is a highly efficient client-tier solid-state drive built for dependable everyday performance inside business-class desktop systems and laptop fleets. Utilizing the standard M.2 2280 (80mm) form factor and operating via a SATA III (6Gb/s) interface, this 256GB module is powered by highly durable Multi-Level Cell (MLC) flash memory and a Silicon Motion controller. It features specialized HP OEM validation firmware, engineered to deliver snappy operating system boot cycles, low idle power consumption, and flat performance reliability.

• Capacity: 💾 256 GB

• Interface: ⚡ SATA III 6Gb/s (M.2 SATA)

• Form Factor: 📏 M.2 2280 (Standard 80mm length)

• Controller: 🧠 Silicon Motion (SMI) Controller

• NAND Flash Type: 🧠 Multi-Level Cell (MLC) NAND Flash

• Sequential Read: 🏎️ Up to 530 MB/s

• Sequential Write: ✍️ Up to 360 MB/s

• SATA Standard: 🛠️ SATA Version 3.1

• Power Efficiency: 🔋 Supports Device Sleep (DevSleep) & Advanced Power Management (APM)

• Core Commands: 📁 TRIM, NCQ (Native Command Queuing), SMART Command Transport

• HP OEM Validated Firmware: Flashed with official HP OEM code layers under model extension -HP. This guarantees direct, seamless compatibility with HP ProDesk mini PCs, ProBook laptops, and EliteBook configurations right out of the box without triggering annoying boot-validation hardware warnings.

• Premium MLC Flash Durability: Built using traditional Multi-Level Cell (MLC) storage memory. MLC architecture is widely regarded for offering far better raw cell longevity and more stable sustained write performance over time compared to budget modern consumer TLC or QLC alternatives.

• Silicon Motion Controller Efficiency: Driven by a proven Silicon Motion platform that manages data pipelines gracefully. It ensures steady garbage collection and background wear-leveling so that the drive doesn't choke up or experience major latency spikes during heavy file movements.

• DevSleep Power Management: Built with an ultra-low-power sleep profile (DevSleep). When installed in a portable thin-client laptop, the drive completely shuts down its active power lanes down to single-digit milliwatts when the system goes into standby, directly preserving battery health.

• Target Systems:

  • HP Client Hardware: Perfect replacement or storage match for HP ProBook 400/600 series, EliteBook 800 series laptops, or EliteDesk/ProDesk Small Form Factor (SFF) desktops featuring an M.2 slot keyed for SATA signals.

• Ideal Workloads:

  • Primary OS Boot Volume: Highly reliable storage tier for loading Windows 10, Linux configurations, or lightweight thin-client operating systems.

  • Everyday Productivity Tasks: Easily manages web browsers, streaming media, office productivity suites, and everyday local data Installation Note

    ⚠️ M.2 SATA vs. M.2 NVMe Check: This is a SATA-based M.2 drive using a "B + M" key physical edge connector layout. It routes its data pathways through the standard 6Gbps SATA controller bus. It is not a PCIe NVMe drive. Always verify that your target motherboard or laptop slot explicitly supports M.2 SATA communication. Plugging this into a modern, strictly NVMe-only M.2 slot will cause the drive to go unrecognized by the BIOS.

    💡 Broad Compatibility: While it contains specialized HP firmware tuning, it operates via the open universal SATA industry protocol layer. This means it will install and format flawlessly inside non-HP motherboards (Dell, Lenovo, ASUS, Gigabyte, etc.) as long as the slot accepts M.2 SATA.

    The Lite-On CV1-8B256-HP pairs the long-term cellular durability of MLC flash with an efficient M.2 layout, providing an exceptional option for reliable everyday client system refreshes.