If you win this listing, you will have in your hands aBeautiful piece of engineering and craftsmanship,asKramerdoes so well,Kramer is commercial quality equipment.
This listing is fora LOT of 4 PT-572+HDMI over Ethernet receivers.They are Guaranteed.There is only 2 power supplies and 2mounting bracket sets included along with 2 factory boxes. They are in Excellent, like new condition except 2 of the 4 units have Velcro on them, I thought I was going to use them like that but didn't.I purchased these as backups a few years ago and haven't needed them, it's time to clear out my un-needed equipment and hope someone else can use it.Kramer is commercial quality equipment.There are specifications and features listed below for you. Ifyou have any questions, please ask. Please check out my other listings. Thank you, Tim
Kramer PT-572+ HDMI over Twisted Pair Receiver
The PT-572+ is a twisted pair receiver for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572+ converts the twisted pair signal back to an HDMI signal.
- Max. Data Rate - 1.65Gbps.
- HDTV Compatible.
- HDCP Compliant.
- HDMI Support - HDMI (V.1.4 with 3D, Deep Color, x.v.Color, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD).
- 3D Pass-Through.
- DGKat Signal Integration - Kramer"s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat cables designed specifically for optimum performance.
- System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable.
- Cable - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use Kramer"s BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
- EDID PassThru - Passes EDID/HDCP signals from source to display.
- Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached.
- Power Connect System - A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other.
- Ultra-Compact Pico TOOLS - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
This product replaces the PT-572
Specifications:
INPUTS:1 RJ-45 connector.OUTPUTS:1 HDMI connector.BANDWIDTH:Supports up to 1.65Gbps bandwidth per graphic channel.COMPLIANCE WITH HDMI STANDARD:Supports HDMI and HDCP.POWER SOURCE:12V DC, 250mA.DIMENSIONS:6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.WEIGHT:0.14kg (0.3lbs).ACCESSORIES:Power supply.OPTIONS:RK-4PT 19" rack adapter.
