Expand a wired network with 16 RJ45 Ethernet ports supporting 10, 100, or 1000 Mbps connections. Auto-sensing speed selection and Auto-MDIX provide plug-and-play connectivity for computers, printers, servers, and other Ethernet devices without manual uplink configuration. A 32 Gbps switching capacity, store-and-forward architecture, 512 kB buffer memory, and an 8,192-entry MAC address table support network traffic across connected devices. Jumbo frames up to 9 kB are supported, along with IEEE 802.3x flow control for full-duplex operation and collision-based backpressure for half-duplex connections. Use the front-panel slide switch to select Normal, Flow Control Off, VLAN, or Network Extend mode. VLAN mode isolates ports 1 through 14 while allowing communication with ports 15 and 16. Network Extend mode supports transmission distances up to 820 feet at a reduced 10 Mbps speed. IEEE 802.3az Green Ethernet technology detects link status, deactivates unused ports, and adjusts power output according to cable length. The fanless design provides quiet operation, while the rugged metal housing and four rubber feet support desktop placement. Included 19-inch rackmount brackets allow rack installation. The switch includes an internal 100–240 VAC, 50/60 Hz power supply, power cable, rackmount brackets, rubber feet, and instructions. A grounding point helps protect connected equipment from external electrical surges. It supports Cat3, Cat5, Cat5e, Cat6, and Cat6a twisted-pair cabling, operates from 32 to 104°F, and measures 11.02 x 4.96 x 1.73 inches.
Connect up to 16 wired devices through RJ45 ports supporting 10, 100, or 1000 Mbps. Auto-sensing speed selection and Auto-MDIX provide automatic uplink and crossover support for plug-and-play network expansion.
Use the front-panel switch to select Normal, Flow Control Off, VLAN, or Network Extend mode. VLAN mode isolates ports 1 through 14 while preserving communication with ports 15 and 16.
Extend a wired connection up to 820 feet at 10 Mbps with Network Extend mode. The switch also supports jumbo frames up to 9 kBytes, 802.3x full-duplex flow control, and half-duplex backpressure.
Handle connected computers, printers, servers, and other Ethernet devices with 32 Gbps switching capacity, store-and-forward architecture, 512 kBytes of buffer memory, and an 8,192-entry MAC address table.
Reduce power use on active network links with IEEE 802.3az Green Ethernet technology, which detects link status, deactivates unused ports, and adjusts power output according to cable length.
Install the compact switch on a desk with four rubber feet or in a 19-inch rack using the included brackets. Its rugged metal housing and fanless design support quiet operation in network workspaces.
Connect Cat3 through Cat6a twisted-pair cabling through the 16 RJ45 ports. The unit includes an internal 100–240 VAC power supply, cable, grounding point, link/activity LEDs, and instructions.
