GoTEK SFR1M44-U100 3.5 Inch 1.44MB USB SSD Floppy Drive Emulator Gray

✓Free 60 Day Returns ✓Free Express Shipping Description:

GOTEK System Floppy to USB Emulator IMPORTANT TIPS The default loaded firmwareis from the GOTEK manufacturer, support 1.44M, 34pin - IBM/PC interface, theformat is DOS/FAT12, and the chip is AT32F415 Cortex-M4. Please make sure yourmachine could support these important points. Attention in Installation Do notbe reverse when installing the cable; The USB drive must be formatted into1.44M FAT12 format , then it could be identified by our GOTEK emulator. If youwould like to use our Gotek floopy emulator on AMIGA, please change ourdefault firmware to FlashFloppy firmware first. Features: 32-bit CPUdesigned, high integration, and reliable performance. Connected to thedevice via the floppy drive interface, simple to install and use. Useordinary USB flash drive for data storage, instead of the floppy disk. Suitable for all kinds of textiles, electronics, machinery which use floppydisk and driver. GOTEK system Floppy to USB emulator Model: SFR1M44-U100code: U00 Suitable Machines: Machines use normal 1.44MB floppy disk andriver, example : STOLL flat knitting machine, MULLER3 BONAS STAUBLI JC4 JC5label weaving machine, YAMAHA KORG etc music instruments which use normal1.44MB floppy disk and driver. Floppy driver with below function needed:Floppy driver with 34pin interface, and 5V DC power plug Use 2HD flpppy diskwith 1.44MB capacity Format of disk : Cylinders: 80 Tracks: 160 Sectors/Track:18 Bytes/Sector: 512 Data transfer rate: 500 kbps Encoding method: MFM.Features: 1.34pin floppy driver interface, 5V DC power supply, easy toinstall. 2.Use ordinery usb flash drive as the medium for transfer design.3.1000pcs partitions in usb flash drive can be used. 4.Built-in self-formatfunction. (read relevant documents to use this function) Panel: 8segmentnumbers: represent partitions number Green led: status of read and writeoperation USB port: connect usb flash drive Button Function: Left button usedto rise ten-digit, right botton used to rise single-digit, press 2 buttontogether to rise hundred-digit.

Features:

• GoTEK 3.5 Inch USB Floopy Disk Drive uses normal USB flash drive as the medium for transfer design. 1.44MB SFR1M44-U100 USB Emulator equipped with 34pin floppy driver interface, 5V DC power supply, easy to install.
• USB Emulator Capacity--1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data transfer rate: 500 kbps Encoding method: MFM. 1000pcs partitions in usb flash drive can be used. This floppy drive simulator is perfect for embroidery machine and industrial control equipment of 1.44MB floppy disk drive
• Attention in Installation -- Do not be reverse when installing the cable; The USB drive must be formatted into 1.44M FAT12 format , then it could be identified by our GOTEK emulator.
• IMPORTANT TIPS-- The default loaded firmware is from the GOTEK manufacturer, support 1.44M, 34pin - IBM/PC interface, the format is DOS/FAT12, and the chip is AT32F415 Cortex-M4, so please make sure your machine could support these important points.
• If you would like to use our Gotek floopy emulator on AMIGA, you need to change our default firmware to FlashFloppy firmware first.

Product Details:

• Hard Disk Interface: USB 1.1
• Connectivity Technology: USB
• Brand: GoTEK
• Special Feature: Plug and Play
• Hard Disk Form Factor: 3.5 Inches
• Hard Disk Description: Solid State Drive
• Compatible Devices: Desktop
• Installation Type: Internal Hard Drive
• Color: Gray
• Hard Disk Size: 1.44 MB
• Hard Drive: ‎1.44 MB Solid State Drive
• Brand: ‎GoTEK
• Item model number: ‎並行輸入品
• Hardware Platform: ‎PC
• Item Weight: ‎5.1 ounces
• Package Dimensions: ‎5.63 x 4.37 x 1.5 inches
• Color: ‎Gray
• Hard Drive Interface: ‎USB 1.1
• Manufacturer: ‎Gotek
• Country of Origin: ‎China
• Is Discontinued By Manufacturer: ‎No
• Date First Available: ‎September 30, 2017