Hello, and welcome to my sale for a used FLSUN Super Racer 3D printer. I am the original owner of this printer, and it mostly sat on my shelf while waiting for a Wham Bam kit to be installed. I did eventually install the Wham Bam flexible build plate on the original glass build plate and printed the bolt and nut test print, which is shown in the photos. Note that the extruder did lightly scrape against the Wham Bam plate, which created a mark on the PEI sheet. It does end up creating a very slight artifact on the resulting print, but it\'s barely perceptible. The aforementioned bolt and nut test print was actually printed after the mark.
I also made sure to plug the unit in since it had been a while from when I took the unit apart originally. There were no issues powering it up and navigating through the menus. Although, to note, since the extruder was not connected, the displayed temperature was wildly inaccurate. I didn\'t use an SD card, so I cannot attest to it working, but I did check the USB drive, which is shown in the photos as well.
This sale includes the following:
- FLSUN Super Racer (unassembled)
- USB Drive
- Grease
- Cleaning Cloth
- PTFE Tube
- Cleaning Brush
- Tube Clips
- Heater Packaging
Note: The USB drive is not the original drive. I had to replace the original one as it would not read in the printer correctly, but I did move all original files over to the new drive. I also double checked that all screws are provided (24 long, 6 short). Also, the original power cable is not included, so one will be required. It\'s a standard C13 power cable similar to what is used with computers.
I provide shipping through USPS and UPS and will ship within one business day of receipt of payment. Due to the weight and size of the box, I recommend checking the different shipping options to see which works best for you. Let me know if you have any questions.
Thanks!
