ELEGOO 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing White 500g
Product Description

ELEGOO photopolymer gum is a kind of polymer that changes its actual properties when acquainted with light and it's VOC free pitch. On account of 3D printing, these are regularly fluid plastic pitches that solidify when presented to a light source, for example, a laser, a light, a projector or light-radiating diodes (LEDs) and the greater part of these light sources illuminate bright (UV) light, which works consummately with our photocuring a long time before use

Recommeded temperature 20°C - 25°C

Consistently wear gloves and veil to evade direct skin contact

Avoid youngsters, dust and direct daylight

Wash with a lot of water quickly in the event that you get immediate skin contact with pitch

ELEGOO Photopolymer Gum

Printing Setting:

• Bottom Exposure:60s
• Normal Exposure:8s

Sap Boundaries:

• Hardness: 84 D; Shrinkage: 7.1 %
• Thickness (25°C): 150-200 mPa.s
• Fluid Thickness: 1.100 g/cm³
• Strong Thickness: 1.195 g/cm³
• Flexure Strength: 59-70 Mpa
• Augmentation Strength: 36-53 Mpa
• Lengthening at Break: 14.2
• Timeframe of realistic usability: 1 year

Read more

Light Scent and Reliable Achievement

Photopolymer sap can be foul sometimes. With the refined equation, ELEGOO gum has a light scent and no sharp smell.Long-time printing can be requesting, however ELEGOO pitch guarantees steady, top notch prints.

High exactness and Low Shrinkage

The phenomenal detail execution of the models printed with sap is much the same as craftsmanship. With low volume shrinkage and direct shrinkage, ELEGOO sap guarantees the print exactness and ensure all the parts printed to fit in the perfect spot.

Free from any and all harm Conservative Bundle

Sealed jug completely wrapped with a plastic air pocket sack and minimal planned bundle box ensure the gum remains set up where they should be.

Read more

Wide Applications

ELEGOO photopolymer tar is viable with the LCD 3D printers utilizing the UV light source to fix models.

It has a wide scope of use from table game miniatures to modern parts and segments.

You can likewise utilize it to print your 3D computer aided design configuration works and accomplish it from a thought.

The solitary constraint is your creative mind. Print now and go with ELEGOO.

ELEGOO 3D Printer Quick Gum Clear ELEGOO 3D Printer Fast Tar Dark ELEGOO 3D Printer Fast Gum White ELEGOO 3D Printer Fast Tar Clear Green ELEGOO 3D Printer Quick Tar Clear Red ELEGOO 3D Printer Fast Pitch Beige

• 【Low Shrinkage and High Precision】ELEGOO photopolymer gum is exceptionally intended for decreasing volume shrinkage during the Photocuring cycle ,which guarantees the high exactness of the print model with smooth finish.
• 【Fast Relieving and Incredible Stability】ELEGOO 405nm Quick Gum was intended to fundamentally diminish printing time with its astounding ease. In the interim its extraordinary strength and legitimate hardness ensure a straightforward printing experience and fruitful printing.
• 【Bright and Staggering Colors】: With top notch shades and photograph initiators inside ELEGOO UV-Restoring gum, the models printed with tar have an unadulterated and dazzling shading impact much the same as an artwork.
• 【Wide Applications】Given the exceptional exhibitions, ELEGOO standard gum is reasonable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.
• 【Safe and Secure Packaging】Leak-proof container completely wrapped with a plastic air pocket sack and perfect planned bundle box ensure the tar remains set up where they belong