UBB Store

Dell SEAGATE EXOS 10E2400 0MFK2F ST1200MM0009 1.2TB 10K SAS 12Gbps 2.5" SFF HDD
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dell SEAGATE EXOS 10E2400 0MFK2F ST1200MM0009 1.2TB 10K SAS 12Gbps 2.5" SFF HDD
Price: US $59.99

Dell Seagate Exos 10E2400 1.2TB 10K 2.5" SAS 12Gbps HDD 0MFK2F ST1200MM0009

Refurbished | Free Shipping | Allstate-Serviced Warranty | Money Back Guarantee

Fully Tested | SAS 12Gb/s | 2.5-Inch SFF | 1.2TB | 10000 RPM | Dell PN: 0MFK2F | Seagate Model: ST1200MM0009

Designed for supported Dell PowerEdge servers and other systems that accept 2.5" SAS hard drives

Avoid compatibility mistakes and downtime. This exact Dell Seagate Exos 10E2400 1.2TB 10K 2.5" SAS hard drive is sold as Refurbished, professionally tested, and identified by the correct Dell part number 0MFK2F and Seagate model ST1200MM0009 so you can validate fitment before deployment and order with confidence.

Built for business and datacenter environments, this 1.2TB 10K SAS enterprise HDD is a practical choice for server replacements, RAID arrays, hot spares, and inventory stocking where matching interface, form factor, and part numbers matters.

Testing / Functional Status (Fully Tested)

This drive is fully tested and verified for proper operation prior to shipment. Our goal is simple: deliver a reliable enterprise hard drive that’s ready for installation and backed by the protections associated with the Refurbished program.

Typical validation includes:

  • Power-on / initialization verification

  • Health check and functional read/write verification

  • Interface detection and stability confirmation

Interface, Compatibility & Downtime Risk (Read This)

Interface: SAS 12Gb/s (Serial Attached SCSI)
Form Factor: 2.5-inch SFF enterprise drive

Important: This is a SAS drive, not SATA. A SATA-only backplane or controller will not accept a SAS drive.

For server installs, confirm controller/backplane compatibility, firmware expectations, and whether you need a specific tray, caddy, or carrier for your chassis.

If you’re replacing an existing drive, matching the Dell part number 0MFK2F or Seagate model ST1200MM0009 helps reduce ordering errors and speeds up approval for production installs.

Specifications

Brand: Dell / Seagate
Series: Exos 10E2400
Capacity: 1.2TB
Form Factor: 2.5" SFF
Interface: SAS 12Gb/s
Speed: 10,000 RPM
Dell Part Number: 0MFK2F
Manufacturer Model: ST1200MM0009
Drive Type: Enterprise Hard Disk Drive (HDD)
Use Case: Servers, RAID arrays, hot spares, enterprise storage with systems that support 2.5" SAS 12Gb/s hard drives, including many Dell PowerEdge server configurations and other enterprise platforms using SAS controllers/backplanes. Please verify:

  • SAS controller/backplane support (SAS requirements for your server model

  • Any firmware / RAID compatibility requirements for your environment

Why Buy Refurbished

This item is offered through the Refurbished program from a quality-vetted seller. states that Refurbished products include free shipping, 30-day free returns, and an Allstate-serviced warranty, with Money Back Guarantee also applying. That gives you two layers of protection: warranty coverage and transaction protection.

Warranty Note (Important)

If your listing is in the Certified Refurbished tier, states the included Allstate-serviced warranty is two years.

If it is listed under Excellent / Very Good / Good, states the included warranty is one year.

Use the warranty length that matches your specific refurb tier.

What’s Included

Dell Seagate Exos 10E2400 1.2TB 2.5" SAS 12Gb/s 10K Enterprise HDD (0MFK2F / ST1200MM0009)

Only the item shown in the photos is included unless otherwise stated. For server parts, please review photos to confirm whether any tray, caddy, or bracket is included.

Buy with confidence from an Refurbished seller offering free shipping, tested enterprise hardware, and verified Dell part-number identification—a dependable replacement option for supported SAS server environments.



Buy Now