Creality Ender 3 S1 Pro linear rail upgrade kit for Y axis. Save money and get your own rails here on without me marking it up
All the PETG printed parts needed for your upgrade. All parts are designed to use existing metal plates. These parts bolt in the place of the where the wheels once were and reuse the same hardware and extruder plate. No drilling, cutting or measuring required. All parts are solid 100% infill (except the 2 disposable rail centering tools)
What you get...2 - Y axis bed mounts1 - Y axis 40 x 40mm spacer to raise the Y rail 7mm (not used with the 40x40 extrusion)
1 - Y axis 40 x 20mm spacer to raise the Y rail 7mm (not used with the 40x40 extrusion)
2 - rail centering tools to center the rail on the extrusion1 - Detailed instructions with pictures
(pictures of screws or T nuts are for example only)
What YOU need to get...
2 - 300mm MGN12H linear rails
Mounting hardware for the rails and block:
30 - M3 x 8mm countersunk screws
20 - M3 T nutsAll of my parts are designed to mount to the blocks using the same screws that are used to mount the rail to the extrusion. M3 x 8mm countersunk screws