• Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
• Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 ℃ without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
• Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
• Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
• Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.

Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover Compatible with Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1/CR 20/CR 20 Pro ANYCUBIC Kobra Voxelab Aquila C2 S2 X2 ELEGOO Neptune 2 2S

Note: It is not suitable for Ender 5 S1, Ender 3 S1 Pro

INSTRUCTIONS:

This magnetic bed accessory is divided into two parts: A (upper)+B(lower)

-Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)

-Part B: The top is magnetic (with the adsorption under the A part), and the back is the adhesive (posted on the printer platform, which plays a fixed role)

-If it fails to adsorb, please rotate it 90 degrees and try again.

NOTE:

This magnetic bed is not applicable for print activity in which the temperature is above 70 ℃, not for PLA +, and not recommended for printing ABS filament.

Suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon, etc.