Cisco Catalyst 2960 WS-C2960-24TT 24-Port Network Ethernet Switch CCNA CCNPNo Power Cord, No Rack Ears, No other accessories. You only get what is in the pictures.
These are not stock photos. You will receive the lot exactly as shown in the pictures.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.07.19 13:08:53 =~=~=~=~=~=~=~=~=~=~=~=
switch: switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...Boot Sector Filesystem (bs) installed, fsid: 2
Base ethernet MAC Address: 00:26:0a:f9:16:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 2 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 9830912
flashfs[0]: Bytes available: 22683136
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
done.
LoadingFile \"flash:c2960.bin\" uncompressed and installed, entry point: 0x3000
executing... Restricted Rights LegendUse, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. XXXXXXXX. cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE12, RELEASE SOFTWARE (fc2)
Technical Support: (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:53 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01900000Initializing flashfs...fsck: Disable shadow buffering due to heap fragmentation.
flashfs[1]: 2 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 9830912
flashfs[1]: Bytes available: 22683136
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status PassedPOST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status PassedPOST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status PassedPOST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status PassedPOST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status PassedPOST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status PassedWaiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be found you require further assistance please contact us by sending email to
XXXXXXXX.cisco WS-C2960-24TT-L (PowerPC405) processor (revision F0) with 65536K bytes of memory.
Processor board ID FOC1324Y12R
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:26:0A:F9:16:80
Motherboard assembly number : 73-11473-05
Power supply part number : 341-0097-02
Motherboard serial number : FOC132344AB
Power supply serial number : AZS13240248
Model revision number : F0
Motherboard revision number : A0
Model number : WS-C2960-24TT-L
System serial number : FOC1324Y12R
Top Assembly Part Number : 800-29859-02
Top Assembly Revision Number : B0
Version ID : V05
CLEI Code Number : COM3L00BRD
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(55)SE12 C2960-LANBASEK9-M
*Mar 1 00:00:31.633: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:00:31.717: %SMI-5-CLIENT: Smart Install Client feature is enabled. It is recommended to disable the Smart Install feature when it is not actively used. To disable feature execute \'no vstack\' in configuration mode
*Mar 1 00:00:32.908: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 1 00:00:54.525: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE12, RELEASE SOFTWARE (fc2)
Technical Support: (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:53 by prod_rel_team
Press RETURN to get started!
--- System Configuration Dialog ---Enable secret order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext you like to enter the initial configuration dialog? [yes/no]: no
Switch>en
Switch#sh ver
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE12, RELEASE SOFTWARE (fc2)
Technical Support: (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:53 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01900000ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(44)SE6, RELEASE SOFTWARE (fc1)Switch uptime is 15 minutes
System returned to ROM by power-on
System image file is \"flash:c2960.bin\"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be found you require further assistance please contact us by sending email to
XXXXXXXX.cisco WS-C2960-24TT-L (PowerPC405) processor (revision F0) with 65536K bytes of memory.
Processor board ID FOC1324Y12R
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:26:0A:F9:16:80
Motherboard assembly number : 73-11473-05
Power supply part number : 341-0097-02
Motherboard serial number : FOC132344AB
Power supply serial number : AZS13240248
Model revision number : F0
Motherboard revision number : A0
Model number : WS-C2960-24TT-L
System serial number : FOC1324Y12R
Top Assembly Part Number : 800-29859-02
Top Assembly Revision Number : B0
Version ID : V05
CLEI Code Number : COM3L00BRD
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(55)SE12 C2960-LANBASEK9-M
Configuration register is 0xFSwitch#
