Aruba Networks 7010 ARCN0103 16-Port GigE 2-SFP Mobility Controller P/N: 7010-US Pulled from working environment.Factory reset password admin password reset to changeme.
Please stand by while rebooting the system.Stage 1 Loader 1.0.5.0 (build 56553)Built: 2016-09-22 at 05:02:10Secure Boot Enabled on the ProcessorBank: PrimaryCPLD: rev: 3.0 000C1203POWER ON RESET CFG:30CC0FF2Initialized I2C0 Controller.Initialized I2C1 Controller.SPD Rev:0x11 DIMM:0 Type:2 Speed:666MHz #Rank:1DDR3: Node 0 Channel 0 Mem size = 4096 MB UDIMMset freq:666666DDR3: Node 0 DRAM frequency 666 MHzDDR3: Node 0 CPU frequency 800 MHzmtb_ps:125 clock:1500 trc:33 trcd:9 trp:9AP3:A0CFFF0 ODTP1:10000Board DDR VDD set to 1.5V.N:0 CH:0 additional rdlvl rdly:1N:0 Ch:0 m:32 s:32 R OK.Rank:0 HW WLVL Passed Mask:1FFAP3:A0CFFF0 ODTP1:10000n:0 ch:0 RTT WR:0200===N:0 Ch:0 m:32 s:32 RW OK.Node:0 Ch:0 TGE Set Memory:4096 MB value:FF FF -- PASSNode:0 Ch:0 TGE Set Memory:4096 MB value:FF 00 -- PASSNode:0 Ch:0 TGE Set Memory:4096 MB value:AA 55 -- PASSNode:0 Ch:0 TGE Set Memory:4096 MB value:00 00 -- PASSDDR3 Initialization Passed.NBU0 DRAM BAR0 base: 00000000 limit: 0013f000 xlate: 00000001 node: 00000000 ( 0 MB -> 320 MB, size: 320 MB)NBU0 DRAM BAR1 base: 001d0000 limit: 00bff000 xlate: 00090001 node: 00000000 ( 464 MB -> 3072 MB, size: 2608 MB)NBU0 DRAM BAR2 base: 00e00000 limit: 0128f000 xlate: 00290001 node: 00000000 ( 3 584 MB -> 4752 MB, size: 1168 MB)Hit Ctrl + X keys to stop autoboot: 0CPBoot image is signedVerifying CPBoot checksum...CPBoot check passedSigner Cert OKPolicy Cert OKRSA signature verified.## Starting application at 0x8C100000 ...CPBoot 1.0.7.0 (build 56553)Built: 2016-09-22 at 04:52:12DRAM: 4 GBDetected [XLP208 Rev B1 (Secure Boot) ] (6a|6a)CPLD: rev: 3.0 16 MBPCIE (B0:D01:F0) : Link up (Gen(1))Bank: PrimaryBoard: A7010CPU: XLP208 Rev B1 (Secure Boot)Clock: Core 800 MHz / SoC 800 MHz (30cc0ff2)Net: ge-0, ge-2, ge-3, ge-4, ge-1Inventory Verification: PASSHit Ctrl + X key to stop autoboot: 0USB0: setting speed to USB_SPEED_HIGH2 USB Device(s) found#1 Storage Device(s) found##Loading image is signed; verifying checksum...passedSHA2 Signature availableSigner Cert OKPolicy Cert OKRSA signature verified using SHA2.[ 0.000000] 0:xlp_napi_vc_mask 0xf[ 0.000000] 0:sae frequency is 500[ 0.000000] 0:nlm_hal_set_sae_engine_sel: xlp2xx return[ 0.000000] 0:-- SAE Frequency set to 500[ 0.000000] 0:cde frequency is 333[ 0.000000] 0:CDE Frequency set to 333MHz[ 0.000000] 0:MSGRING_NAPI: Initializing NLM NAPI subsystem[21:19:02]:...Starting rcS...Aruba NetworksArubaOS Version 8.3.0.9 (build 72226 / label #72226)Built by p4build@pr-hpn-build07 on 2019-09-13 at 12:50:59 UTC (gcc version 4.4.5 )(c) Copyright 2019 Hewlett Packard Enterprise Development LP. <<<<< Welcome to Aruba Networks - Aruba A7010-US >>>>>[21:19:03]:Probing for EEPROM devices [ OK ][21:19:04]:Probing for real-time clock [ OK ][21:19:04]:Initializing LCD module [ OK ][21:19:04]:Uncompressing core image files [ OK ][21:19:47]:Extracting corefs [ OK ][21:19:49]:Enabling watchdog [ OK ][21:19:49]:Starting device managerPerforming eUSB Flash fast test... [ DONE ] [ OK ][21:19:51]:Mounting flash [ OK ][21:19:51]:Initializing 511MB as swap on zRam0 [ OK ][21:19:54]:Turning swap ON on zRAM0 [ OK ]PoE firmware [ OK ][21:20:01]:Checking system inventory [ OK ][21:20:01]:Installing ancillary FS [ OK ]Performing integrity check on ancillary partition 0 [ OK ] Extracting Webui files../[21:20:27]:Reboot Cause: User reboot (Intent:cause:register 78:86:50:60)[21:20:27]:Starting syslog service [ OK ][21:20:29]:Deleting the Databases [ OK ][21:20:30]:Restoring the database [ OK ][21:20:31]:Generating SSH keys [ OK ][21:20:32]:Initializing TPM and certificates [ OK ][21:21:03]:Checking for configuration upgrade [ OK ][21:21:05]:rcS Done(123 sec)[21:21:05]:Starting OS services [ OK ]Starting auto provisioningRegistered for NTP SyncUsing port gigabitethernet 0/0/15 for auto provisioningInitiated DHCP, awaiting DHCP responseAuto-provisioning is in progress. It requires DHCP and Activate serversChoose one of the following options to override or debug auto-provisioning... 'enable-debug' : Enable auto-provisioning debug logs 'disable-debug' : Disable auto-provisioning debug logs 'mini-setup' : Start mini setup dialog. Provides minimal customizatio n and requires DHCP server 'full-setup' : Start full setup dialog. Provides full customization 'static-activate' : Provides customization for static or PPPOE ip assignme nt. Uses activate for master informationEnter Option (partial string is acceptable):