The Eisbaer LT Aurora CPu AIO water cooling system offers extremely good cooling performance thanks to the full copper radiator. The components used come from the classic DIY water cooling area and are also largely used in enterprise products for servers. The quick-release fastener allows the Eisbaer LT Aurora to be expanded with additional components. Cooler As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed across the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. Full digital RGB equipment The cooler pump unit and the fans are fully equipped with digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set using the included controller or a digital RGB control on the mainboard. The illuminated polar bear on the cooler pump unit creates a nice visual effect. AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / SP3 / SP6 / sTRX4 / sWRX8 Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data Radiator L x W x H: 390 x 120 x 25 mm Material cooling fins, pre-chambers & cooling channels: copper Material thread: Brass Material outer casing: Stainless steel Connections: 2x G1/4" Technical data cooler with pump L x W x H: 69x69x45mm Radiator base material: Nickel-plated copper Housing material: PMMA Connections: 2x G1/4? (+ 1x fill port G1/4?) Pump Type: DC-LT2 Pump speed: 2600 rpm (+/- 10%)