ATI Rage 128 Pro 16MB 🟢 AGP Video Card 630-3500 pn 1027270104 027884 G4cube OEM
VRAM -- 16MB

PORT -- VGA and ADC (Apple Display Connector)

NOTE -- This card will NOT natively boot in a PMG4 Quicksilver Tower

RESOLUTIONS -- supports the Apple Cinema Display 15", 17" ( 1080 x 720 ), 20" ( 1600 x 1080 ), 22" ( 1600 x 1024 ), 23" ( 1920 x 1080 )

I have found that this graphicscard runs great with all the above and also with the Dell 19" ( 1920 x 1080 ) -- via the VGA port

These cards were pulled from G4 Cubes OEM ( Original Equipment Manufacture )
Artwork, Graphics, Gaming ( 2-D games especially good ), Spreadsheets, Writing demands all have GOOD to GREAT response times
They have all been tested and are working perfectly
The serial numbers will vary from the photos
Heatsinks run cool to warm, rarely hot
Really great for general use
Buy in bulk for best deal
I love these cards !
SIDE NOTES
... sharing my limited experience here...
Mirroring with BOTH ports ( ADC and VGA ) produces some slightly sketchy graphic results around buttons via the VGA, since the card is spec'd for one monitor only -- although the image is good enough that a mirrored monitor visual display presentation could still pass for basic demonstration purposes.
These cards are not dual monitor capable, BUT the NVIDEA MX2 TwinView 64mb graphic cards do run a dual monitor space setup. Also, motion graphics are marginally better on the 3-D motion and run warm to hot compared to the cooler to the touch performance of the ATI Rage Pro 128 16MB.
Alternately, for an ATI Rage 128 Pro 16MB card use can be minimized by setting screen resolution to 800x600 or 640x400 ( lower than default ), pointing external fans ( from a cool room ) towards the computer and set minimal Extensions OS9 / OSX minimal install ( no language packages ) -- amongst other possible system tweaks -- to get better 3-D motion performance. Basically, on a G4 Cube with 450 Mhz CPU, motion is usually around 5to 10 fps / WITHmentioned tweaks roughly 15 to20 fps / CPU upgrades of approximately 1.0 Mhz to 1.8 Mhz will increase motion to 30-50 fps, roughly speaking.
The ATI Radeon 9000 Pro 128 MB ( for Mac ) is ideal for such Gamers who are using a G4 Cube and need the very best available 3-D motion.
The Wang 256 MB cards I have heard is amazing but I could not get to work on my G4 Cube test setup. Still working on this…
Flashing cards for other than intended machine uses is ( currently for me ) a discouragingly difficult task. Catch you later...
Happy Shopping !
=D