 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
915MHz ESP32 LoRa 32 V3 OLED Board + LoRa V3 Case + 915 MHz LoRa32 Antenna for Meshtastic LoRawan IOT (Pack of 2), not Compatible with Heltec LoRa V2 Product Details - Antenna: LoRa Antenna 915MHz: Frequency 824-960MHz, Gain 2dBi, Total Length 8cm, Standing wave ratio / S.W.R.≤2.0, Impedance 50Ω, Max Input power 50W, RF Cable RG1.13 cable See more
- Brand: DIYmalls
- Color: white
- Number of Channels: 1
- Impedance: 50 Ohms
- Maximum Range: 2800 Meters
- Manufacturer: Heltec Automation
- Number of Packs: 2
- Unit Count: 6.0 Count
- Number of Items: 2
- AntennaDescription: LoRa Antenna 915MHz: Frequency 824-960MHz, Gain 2dBi, Total Length 8cm, Standing wave ratio / S.W.R.≤2.0, Impedance 50Ω, Max Input power 50W, RF Cable RG1.13 cable
- Brand: DIYmalls
- Manufacturer: Heltec Automation
- Number of Items: 2
- Mfr Part Number: DM2886SX2+DM2835AX2
- Built-In Media: No
- Warranty Description: 30 days
- Unit Count: 6.0 Count
- Number of Channels: 1
- Impedance: 50 Ohms
- Maximum Range: 2800 Meters
- Color: white
- ESP32 LoRa V3 is not compatible with the LoRa 32 V2. The lora case is only designed for lora v3 board.
- You can power lora v3 board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- The lora v3 case has a strict requirement in size of lora antenna fitting with it. It means not all antenna is suitable for it.
- LoRa oled board v3 comes unassembled, soldering required by you, not equipped with lithium battery.
- You will receive 2pcs 915MHz esp32 lora oled board V3 with 1.25mm-2p cable, 2pcs lora v3 case, and 2pcs 915mhz lora antenna.
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
 |
|
