Nomadic 1U Fiber Channel Raid Storage w/48TB secure w/ 12x4TB drive 2x Fibre with GBIC, Redundant dual power supply hot swap, RJ45 network management port, SAS Expansion port, LCD display refer to gvsf.com for all product specification
Total storage in 1U rack space:
48TB RAID combines Fibre, SAS 6.0Gb/s and 2x4GB/sec Fibre Channel Speed and data protection TC/IP network in a 1U rack-optimized enclosure.
The innovative GVS-designed Nomadic 1U RAID architecture combines affordable, high-capacity SAS 6Gb/sec drive technology with a single to controller host channel interface.
reliable data access. Each GVS Drive Module uses a dedicated 6.0Gb/s drive channel, maximizing for the 800MB/s Fibre Channel host connection.
4480C Controller RAID features:
RAID level 0, 1, 1E, 3, 5, 6, 10, 50, 61, 65, Single Disk or JBOD
Multiple RAID selection
12 independent logical arrays configurations per controller
Online array roaming
Offline RAID set
Online RAID level/stripe size migration
Online volume set growth
Support global hot spare and dedicated hot spare
Instant availability and background initialization
Automatic drive insertion / removal detection and rebuilding
- Option expansion of drive to SSD
- Optional Greater than 15TB per disk drive
- Each logical array can have an independent RAID level
- Write back and write through cache selection
- Variable stripe size
- LUN slicing
- Online RAID group capacity expansion
- Drive hot-swapping
- Intelligent Drive Management
- Disk scrubbing/ array verify scheduling for automatic repair of all configured RAID sets
- Login record in the event log with IP address and service (http, telnet and serial)
- Support intelligent power management to save energy and extend service life
- Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
- Redundant controller operation with active/active and failover/failback function
- Automatic synchronization of firmware version in the dual-active mode
- Multi-path & load-balancing support (Microsoft MPIO)
- Support for multiple RAID sets, multiple hosts and LUN masking and mapping
- Max 122 devices 1.8PB
- Max 128 LUNs (volume set) per controller
Management:
- GVS View management software for all major platforms via Ethernet port
- Field-upgradeable firmware in flash ROM
- Firmware-embedded manager via RS-232 port
- Firmware-embedded Web Browser-based RAID manager - Access your RAID subsystem from any standard internet browser via 10/100 Lan port
- Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user notifications to be sent via e-mails
- Access terminal menu by telnet via 10/100/1000 LAN port
- API library for customer to write its own monitor utility
- SAP management feature to easily manage multiple RAID units in the network
- Host Interface to the Fibre storage:
- Two 4GB Fibre Channel ports (SFP) - Optional 8x16GB FIBER, or 12GB SAS
- Optional Gigabit iSCSI host
- Optional 10Gbit Host Interface
- Support for point-to-point, loop and fabric (switched) topologies
- Support read/write per port or read only true
- 2nd Fibre Channel port w/o need for SAN Software or switch
- Short-Haul Transceiver (supports up to 500m with 50/125 m MMF)
- Long-Haul Transceiver (supports up to 10km with 9/125 m SMF)
- RAID Controller 2GB cache upgrade to cold-rolled steel
Inside:
Zinc-plated with bright chromate
Outside:
Top cover anodized for better cooling
Cooling:
Rear: 4 x 60x 38mm fans
Self-regulating speeds and front-to-back cooling
Optional: Front security door locking, noise reduction and air filter
Expansion:
12 hotswap SAS 6Gb/sec drive bay with up to
2 x LC FC Interface, SAS expansion 128 drive support per single SAS expansion port
Controls:
Power secure lock key for on/off and system
reset + serial port + RJ45 + FC LC or iSCSI + SATA and SAS with SAS expansion port
Indicators:
LCD Out-of-Band, RS-232, LAN, and Fibre Channel
Operating System:
OS Independent
Drive Bay:
Hotswap 12x 4TB SATA 6Gb/sec
Optional SAS or SATA Drive can be mixed
Temperature:
5°C to 45°C (41°F to 113°F)
Storage temperature: -40° to 47°C (-40°F to mode : 5% to 75%
Non-operation mode : 5% to 95% non-condensing
Altitude:
Sea level to 10,000 ft.
Maximum thermal output: 1465 BTUs per hour
Power Supply:
275W 2x275W hot-swap Redundant load-sharing hot-swap power supplies
Min 1x500W module w/ 12 Drive and Dual Controller support
Each 275W Module run Max 40A
Max 2x Universal input (100V to 240V AC),
power factor corrected
Frequency: 47Hz to 63Hz, single phase 8-4A
Power Consumption:
Min: 57W Max: 115W tolerance : ±5%
Dimension:
D22” (558.80mm) X W17.125” (434.98) X H1.75” (44.45mm)
With Front Locking Face Option D23.25” (590.55mm) X W17.125” (180.98) X H1.75” (44.45mm)
Weight:
17 (7.71 kg) with dual redundant power supply. With packaging 27lb (12.25 kg)
detail product spec can be find on gvsf.com website; check every item individually to insure its quality, so please check the pictures
FAST SHIPPING!!
The pictures in the posting are of the exact item being sold and what you will receive!!
Thank you for checking out my posting
PLEASE ASK ALL QUESTIONS BEFORE PAYMENT
UNTESTED AND AS IS
Returns aren't acceptable
ALL FREIGHT COSTS FOR RETURN OF ELIGIBLE PRODUCTS ARE RESPONSIBILITY OF BUYER
PAYMENTS: The payment is expected within 3 days after the end of sale.
For large item you can request estimate for Fright on-line shipping from 94114 freightquote.com/
SHIPPING: The item will be shipped within 2 business day after the payments is received! ships from gvsf.com
