- 【Double Sided Textured Printing】The product is flexible spring steel plate with double sided textured PEI coating. The dual sided PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
- 【Flexible and Easy to Remove】The PEI spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or you can bend the build plate after the PEI plate cooled and remove the prints. The print mat won’t be out of shape.
- 【Good Adhesion】The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before remove the model to avoid damaging the coating.
- 【Compatible Filaments】PEI surface plates print most filaments like 3D Printers】The double-sided textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering.
Product Description
Specification
Size: 257x257mm
compatible with : Lab X1 Series/ Lab X1-Carbon Combo/ Lab P1P
Packing list
1x Upgraded 257*257mm Double Sided PEI Build Plate
Advantage
1、Double-sided printing, It is convenient, durable and practical.
2、Suits variety of filaments, especially for PLA.
3、Easy to clean, just wipe it off with a soft cloth before printing or alcohol after printing.
4、It is a flexible steel platform .The coating is not easy to fall off and scratch. Can be gently bent thousands of times without being out of shape.
5、You only need to bend the PEI with your hands, and the model can be easily demoulded without using other tools.
6、Easy to Install:The PEI spring steel sheet is flat and flexible, lab X1 3D printer heated bed is magnetic, just put on it and print.
About the adhesion of print bed :
1、Before printing, it is necessary to wipe the plate with a soft cloth to ensure that there is no dust on the bed to affect the adhesion of the print bed.
2、Before printing, it must be leveled, keep a distance of A4 paper thickness between the nozzle and the platform, so as to avoid the nozzle scratching the surface and avoiding the deformation of the bottom surface of the print model.
About the cleaning of print bed after printing :
1、Wipe the stains with over 95% strength alcohol gently, the recommended cleaning time is less than 5 minutes.
2、Do not use any strong chemical reagents to clean PEI.
About removing the prints :
1、The hot bed temperature must drop to room temperature before removing the prints.
2、 The small prints can be taken off directly by hand, the large prints need to bent PEI sheet by hand and removed without other tools.
