10 pcs New Connector ST Circular Bare Fiber Optic Adapter Flange Coupler
Description:
Bare fiber adapter is a simple auxiliary tool for the testing of optical fiber, and is very suitable for the emergency repair of optical fiber and temporary connection. The insertion core of the bare fiber adapter and the no epoxy glue in the optical fiber through hole are easy to be inserted in the bare optical fiber, pull out and repeatedly use, and have low insertion loss.
Characteristic
Operation is simple and intuitive, can be observed by the naked eyeSingle mode and multimode optical fiber can be appliedUnique design, safety, reliability and low insertion loss of optical fiber.Without any dielectric core and epoxy adhesive and the through hole, easy to insert, bare fiber pull-out and repeated useInsert core and connector module can be replaced, insert core aperture size and connection head can be customized, can be applied to a variety of changing needs
Application:
Effect on bare fiber, temporary connection OTDR, optical power meter, light source and other optical fiber port data and testing instruments and equipmentTemporary connection of optical fiber and optical fiber emergency repair
Technical index:
Insert core diameter: 125-127umOutside diameter: LC-1.249mm FC-2.499mmInsertion loss: < 0.2dBRepeatability: < 0.2dBFiber type: SM/MMPlug times > 1000 timesWorking temperature: -40 degrees C + 80
Usage method：
1 fiber stripped coating layer is about 15-20mm, and rinse with alcohol wipe and clean the paper;
2 the naked optical fiber adapter switch is pressed down, the optical fiber is slowly pushed into the through hole through the hole until the ceramic core is extended to about 3-5mm, and the switch is relaxed;
3 zoned fiber pen (Ruby knife or tungsten blade was 90 degrees vertical for fiber) lightly exposed at the bottom of the fiber, fiber breakage, the operation is completed.
Bare fiber optic adapter (square, circle)Features: Low insertion loss Good repeatability Simple operation Scope bare fiber optics lines temporary connection LabFiber Test Specifications: Type: FC / PC SC / PC ST / PC LC / PCFerrule Diameter: 125-127umFerrule outer diameter: 2.499mm 1.249mmInsertion loss: <0.2dBRepeatability: <0.2dBTensile strength: 100gFiber Type: SM / MM mating cycles> 1000 timesOperating temperature: -40 ~ + 80FC / PC bare fiber adapterproduct description:Bare Fiber Adapter is an auxiliary tool for professional fiber optic test market, it is highly suitable for emergency repairs and temporary fiber optic connection.Model: FC / PC, SC / PC, ST / PC, LC / PCKey Features:- Bare Fiber Adapter- Length 40MM \ diameter 13MM- Cycle test (-40- + 80 ) Change <0.2dB- Easy and intuitive to operate, can be observed by the naked eye- Reusable, single / multi-mode fiber can be used- Loss, good reflection suppressingInstructions:1. Strip the fiber coating (15-20mm) and cleaned with alcohol;2. Insert the fiber optic adapter switch pressure introduction holes along slowly push until the projecting ceramic core (5-6mm) will switch to relax open;3. ruby knife scratching the bottom of the exposed portion of the optical fiber, the fiber break.Bare Fiber Adapter is a simple auxiliary tool for fiber testing, it is highly suitable for emergency repairs and temporary fiber optic connection. Bare fiber adapter ferrule fiber holes and no epoxy glue and any medium, easy to bare fiber insertion, extraction and repeated use, and has a low insertion loss,characteristic:1. simple and intuitive operation, by visual observation2. The single-mode and multimode fiber can be applied3. Unique fiber pressed-designed, safe, reliable, low insertion loss4. mortise and through-hole-free epoxy glue and any medium, easy to bare fiber insertion, extraction and repeated use5. ferrule connector module and replaceable, pore size and connector ferrule can be customized, applicable to a variety changing needsapplication:1. acting on bare fiber, a temporary connection OTDR, power meter, light source and other optical port data and test instrumentation equipment2. The optical fiber splicing and fiber temporary emergency repairInstructions:1. Strip the fiber coating layer of about 15-20mm, and wipe clean with alcohol and wipes;2. Insert the bare fiber adapter switch is depressed, the optical fiber along slowly introduced into the through-hole Push until the ceramic ferrule extends approximately 3-5mm, loosen the switch open;3. Plan fiber pen (or ruby tungsten steel knife blade 90 degrees perpendicular to the fiber) scratching the bottom of the exposed portion of the optical fiber, the fiber break, the operation is complete.Fiber temporary connection
NOTE: Colors will be different from each monitor and computer.
Package:
10x ST Bare Fiber Adapter

Shipping:

Usual We Ship the Item within 1-3 days after the payment is cleared.

We Will Ship The Item By E-packing /China Post/ Fedex / EMS / TNT / DHL /UPS

All the packing Ship with tracking number.

Payment:

We Accept Paypal

Terms Of Sale:

Please Check and Confirm the Part No.before purchase.

We do not responsible on the custom tax for any order. Customer should pay for thecustom fee in any case.

If you want to return the item,pls contact us first and make sure the item is un-opened.

Accepted 30 days return policy.