Fits the ASUS Ascent GX10 in a 10" mini rack at 2U, rear panel facing out, so the USB-C ports, HDMI, 10GbE and the ConnectX-7 cages all stay reachable without unracking anything. The cage is open lattice across the top, bottom and back, so nothing gets in the way of the airflow the machine depends on.

FITS

• ASUS Ascent GX10, all storage configurations

⚠️ Before you order and install:

• Check your unit says Ascent GX10. The NVIDIA DGX Spark is a different machine and has its own mount in my shop. The two are not interchangeable.

KEYSTONE OPTION
Choose one at checkout:

• No Keystones. Just the mount.
• +1 Keystone. One holder to the right of the GX10, with an RJ45 keystone jack and an Ethernet cable included.
• +2 Keystones. One holder on each side of the GX10, with two RJ45 keystone jacks and two Ethernet cables included.

The jacks and cables come with the keystone options, so you can bring a network drop out to the front of the rack without sourcing the parts separately.

WHAT YOU GET

• One 3D printed mount.
• The RJ45 keystone jacks and Ethernet cables that go with the option you pick.
• Rack screws are not included. Use whatever your rack takes.

MATERIAL
PETG, not PLA. This matters more here than on most devices. The GX10 draws real power under a training run and moves a lot of air doing it, so the mount wraps a machine that runs warm and stays open at both ends. PETG holds its shape where PLA starts to sag.

💬 For any custom design requests please message me.