2 Integrated Boards Super X8DTS-F-2U
Key Features
Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following: 1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s 2. Up to 96GB DDR3 1333/1066/800MHz
ECC reg. DIMM; 6x DIMM sockets 3. 3x PCI-E 2.0 slots (can be used for
host or storage expansion) 4. I/O ports: 1 GbE LAN, 1 dedicated
LAN for system management (IPMI
2.0 w/ Virtual Media/KVM over LAN),
SAS 2.0 x4 JBOD expansion ports 5. 24x Hot-swap 2.5" Drives Trays
shared between server nodes 6. 1200W Redundant Power Supplies
Gold Level Certified
Available Colors: Black
Drivers & Utilities BIOS / IPMI Tested Memory / HDD Manuals
Product SKUs SSG-2026T-DE2R24L

• SuperStorage 2026T-DE2R24L (Black)

Motherboard
2x Super X8DTS-F-2U Processor/Cache CPU

• Dual 1366-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
• Intel®
  Xeon®Processor 5600 Series (Westmere)
• Intel®
  Xeon®Processor 5500 Series (Nehalem-EP)

QPI

• up to 6.4 GT/s

System Memory Memory Capacity

• 6x 240-pin DIMM sockets
• Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

• 1.5 V / 1.35V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices Chipset

• Intel® 5520 (Tylersburg) chipset
• ICH10R + IOH-36D

SAS/SATA*

• LSI 6Gbps SAS 2008

SAS2 Expander

• Scalability through cascading
• 6Gb SAS2/SATA2 HDD support
• Inband SES-2 Enclosure Management

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Nuvoton WPCM450 BMC

Network Controllers

• Intel® 82599EB controller for Dual 10 Gigabit Ethernet interconnection between nodes
• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization

Graphics

• Matrox G200eW 16 MB DDR2

Super I/O

• Winbond 83827HF chip

Expansion Slots (per Node) PCI-Express

• 3 (x8) PCI-E 2.0 slots (can be used for host or storage expansion)

Input / Output (per Node) SAS

• 4x 6Gbps JBOD expansion ports

LAN

• 2x RJ45 LAN ports

USB

• 2x USB rear ports (via KVM cable)
• 1x USB on-board (TypeA)

VGA

• 1x VGA Port (via KVM cable)

Serial Port / Header

• 1 console port (via KVM cable)

System BIOS BIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Chassis Form Factor

• 2U Rackmount

Model

• CSE-927ETS

Dimensions Height

• 3.5" (88mm)

Width

• 17.2" (437mm)

Depth

• 26.75" (679mm)

Gross Weight

• 85 lbs (38.6 kg)

Available Colors

• Black

Front Panel Buttons

• Power On/Off button
• System Reset button
• Alarm Mute Switch

LEDs

• Power LED
• Hard Drive Activity LED
• 2x Network Activity LED
• System Overheat LED
• Power Fail LED

Drive Bays Hot-swap

• 24x Hot-swap 2.5" Drive Bays shared between server nodes
• SAS or enterprise SATA HDD only recommended

Backplane SAS2 dual Expander Backplane, features:
• Scalability through cascading
• 6Gb SAS2/SATA2 HDD support
• Inband SES-2 Enclosure Management
• Redundancy dual ported SAS architecture
• Robust AirMax server node connections (SBB specification) System Cooling Fans

• 12x PWM Fans

Power Supply Redundant 1200W high-efficiency power supply with PMBus AC Input

• 1000W Output @ 100-140V, 11.5-8A, 50-60Hz
• 1200W Output @ 180-240V, 8-5.5A, 50-60Hz

DC Output

• 1000W: +12V/83A; +5Vsb/4A
• 1200W: +12V/100A; +5Vsb/4A

DC Output
with PDB

• +5V: 50 Amp
• +3.3V: 30 Amp
• -12V: 0.6 Amp

Certification
Gold Certified
[ Test Report ] PC Health Monitoring CPU

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
• 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN

• Total of 12 fan headers supporting up to 12 fans

Temperature

• Monitoring for CPU and chassis environment
• Thermal Control for 12x fan connectors
• PECI

Operating Environment / Compliance RoHS

• RoHS Compliant

Environmental Spec.

• Operating Temperature: 10°to 35°C (50°to 95°F)
• Non-operating Temperature: -40°to 70°C (-40°to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

* SATA support requires interposer

Parts List - (Items Included) Part Number Qty Description Motherboard / Chassis MBD-X8DTS-F-2U
CSE-927ETS 2
1 Super X8DTS-F-2U Motherboard
2U Chassis Add-On Card AOM-SAS2-L8-O-P 2 AOM-SAS2-L8-O-P Backplane BPN-SAS-927 1 SC927 24 x 2.5HDD BPN Cable 1 CBL-0042L 2 24 PIN POWER CONNECTOR EXTENTION, 20CM. 18AWG Cable 2 CBL-0160L 2 NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) Cable 3 CBL-0218L 2 11.5CM KVM/SUVI 36 PIN TO 9 PIN/15 PIN 2USB, 30/28AWG CD CDR-X8 1 For X8 series Power Distributor PDB-PT927-SG 2 SC927 PDB Input +12V and 5Vsb and output with additional 5V Power Supply PWS-1K21P-1R 2 1200W 1U GOLD LEVEL PWS WITH PM BUS Riser Card RSC-R2UT-2E4E8R-SS026 2 RSC-R2UT-2E4E8R-SS026 Heatsink / Retention SNK-P0037P 4 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP) Cable 4 CBL-0217L 2 16 pin control panel converter cable for SC826,846, 22cm, PBF Fan 1 FAN-0088L4 6 40x56, 4 PIn PWM Fan Assembly for SC513F, 515, 823M Mounting Rails MCP-290-00057-0N 1 Rail set, quick/quick, default for 4U 17.2\"W Tray(s) MCP-220-92701-0N 24 Support 2.5” SATA/SAS/SSD HDD tray with LSI converter bkt Tray(s) MCP-220-92702-0N 1 SC927 2U motherboard tray supporting 3LP

Terms and Conditions

Hours of Operation

Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.

Returns or Exchanges

Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after 30 days. All returns must be approved by SMCI Express’ Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.

Payment

We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged 8.25% sales tax.

Shipping Info

We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service. Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.

On May-18-12 at 01:11:50 PDT, seller added the following information: