Specifications
Product SKUs
SSG-6048R-E1CR24H
- SuperStorage 6048R-E1CR24H (Black)
Motherboard
Super X10DRH-iT Processor/Cache
CPU
- Intel® Xeon® processor E5-2600 v4†/v3 family(up to 145W TDP)*
- Dual Socket R3 (LGA 2011)
Cores / Cache
- Up to 22 Cores† / Up to 55MB† Cache
System Bus
Note† BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.System Memory
Memory Capacity
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
Memory Type
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
- RDIMM:32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage
Error Detection
- Corrects single-bit errors
On-Board Devices
Chipset
SAS
- SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID 0,1,5,6,10,50,60
SATA
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Intel® X540 Dual Port 10GbE
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Input / Output
LAN
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
- 1 Type A
VGA
Serial Port / Header
- 1 Fast UART 16550 port / 1 Header
Chassis
Form Factor
Model
Dimensions and Weight
Width
Height
Depth
Weight
- Gross Weight: 92 lbs (41.7 kg)
- Net Weight: 55 lbs (24.9 kg)
Available Colors
Front Panel
Buttons
- Power On/Off button
- System Reset button
LEDs
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Power fail LED
Expansion Slots
PCI-Express
- 1 PCI-E 3.0 x16 slot
- 6 PCI-E 3.0 x8 slots
- Slot 1 & 2 occupied by controller and JBOD Expansion Port
Drive Bays
Hot-swap
- 24x 3.5" Hot-swap SAS3/SATA3 drive bays
Optional
- 2x 2.5" Hot-swap HDD bays (rear)
Backplane
SAS3/SATA3 single expander per backplaneSystem Cooling
Fans
- 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
Power Supply920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFCAC Input
- 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
With Power Distributor
- +5V: 45A
- +3.3V: 24A
- -12V: 0.6A
Certification Platinum Certified [ Test Report ]System BIOS
BIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
Operating Environment / Compliance
RoHS
Environmental Spec.
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
Parts List
Parts List - (Items Included)
Part NumberQtyDescriptionMotherboard / ChassisMBD-X10DRH-iT CSE-846BE1C-R920B 11Super X10DRH-iT Motherboard 4U ChassisBackplane BPN-SAS3-846EL1124-port 4U SAS3 12Gbps single-expander backplane, support up to 24x 3.5-inch SAS3/SATA3 HDD/SSDCable 1 CBL-0296L34 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWGCable 2 CBL-PWEX-06452big 4 pin male to big 4 pin female, power extension 15cm, 20AWG,RoHS/REACHCable 3 CBL-SAST-0531-014MINI SAS LABEL FOR REDUNDANT PWR SYSTEMSPartsMCP-260-00042-0N1STD I/O shield for X9 socket R server MB with Gasket.Heatsink / RetentionSNK-P0048PS22U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MBPower Supply PWS-920P-SQ2920W 1U Redundant PWS W/ Quiet ModeAdd On CardAOC-S3108L-H8IR-O-P1SAS-3, GEN-3 RAID card. Supports 12Gb and RAID 0, 1, 5, 6, 10, 50, and 60. Includes 2GB memoryAdd On ModuleAOM-SAS3-8I8E18-port Mini SAS HD Int-to-Ext cable adapter w/FH bracket,HF,RoHS/REACH
