Description:
Tripp Lite Switched Automatic Transfer Switch / ATS PDU provides a redundant power option for singlecorded network devices. Dual input cords support separate connection to PRIMARY and SECONDARYpower sources. The ATS will normally maintain continuous output to all outlets as derived from theprimary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switchover to the secondary power source until the primary input is restored and stable. Built-in LX Platformnetwork management interface card. The Java-free LX Platform HTML5-based network interface enablesfull remote access for PDU status monitoring and email notifications via secure web browser, SNMP,telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernetnetwork. Optional EnviroSense2 modules (sold separate) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet,SSH, FTP, DHCP and NTP. Switched PDU features include individually controllable output receptaclesand built-in network interface. Super-fast switchover between primary and secondary power sourcesoccurs within milliseconds. ATS functionality is supported by any two compatible AC power sources,regardless of phase angle, to support a variety of advanced redundant power networking applications.Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundantUPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, theprimary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp LiteSmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATSconfigurations utilizing separate mains circuits, backup generators and even separate utility power gridfeeds are fully supported. On-board ATS processor constantly evaluates power quality on both inputsources to prevent transfer to the secondary source when unavailable or of lower quality than the primarysource. Front input LED's display primary or secondary power availability.
Features:
●20A 120V Power Distribution Unit (PDU) with LX Platform network interface, Auto-Transfer Switch(ATS) and Switched outlets (Agency de-rated to 16A)●Provides a redundant A/B power option for non-redundant networking equipment with a single inputpower cord●Switched PDU features enable programmable or real-time power control of individual outlets via built-innetwork interface● Digital display continuously reports total output power consumption in amps● 16 switched NEMA 5-15/20R outlets● 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depthSet of two 12 ft. / 3.6m NEMA L5-20P input cables with set of two 5-20P adapters support connection toseparate PRIMARY and SECONDARY inputs●ATS circuits normally maintain output sourced from the primary input cable; As primary input power failsor becomes unstable, the ATS will switch to maintain output sourced from the secondary input cableuntil power on the primary input is restored and stable●ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPSand fully redundant UPS protection when each cord is connected to a separate UPS system (in a twoUPS environment, the primary input cable must be supported by an online UPS with zero transfer timesimilar to Tripp Lite SmartOnline series)●Advanced ATS configurations utilizing separate mains circuits, backup generators and even separateout of phase utility power grid feeds are fully supported●On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to thesecondary source when unavailable or of lower quality than the primary source● Super-fast switchover between primary and secondary power sources occurs in 2-7 millisecondsPre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20)provides enhanced remote management capabilities●PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenancefunctions in large installations, including firmware update checks and backup and restoration of deviceconfigurations● IP-based Auto Probe detects lost connectivity and restores service autonomouslyOptional EnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities●Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is firstenergized● Front panel LEDs confirm power availability on both input lines● Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases