Features of the S2 Filament Dryer

• Better Printing With Dry Filament - SUNLU S2 Filament Dry Box will remove excess moisture of 3D printing filament, which help you avoid common problems like clogging, poor adhesion and layer migration caused by the dampness of the filament.
• Heating More Evenly, Drying Faster - As an upgraded product, the S2 drying box adopts a double heating element structure, which heats up faster and evenly heat.
• Convenient Touch Screen Operation - Our Upgraded Filament Drying Box can adjust temperature (35~70℃) and time (1~99 hours) through the touch screen. After completing setting , the time, temperature, humidity and other indicators will be displayed on the screen in real time.
• Remember Your Operation - You can choose consumable code like PLA to jump to the corresponding default temperature and time, or adjust them you want. The settings before the shutdown will be remembered until you change settings again.
• Quality and Service Guarantee - SUNLU FILADryer S2 has a variety of certificates to encure quality, such as CE, FC, RoHS, etc.. And there is one year warranty of our filament dryer and lifetime technical and service support.

Packing List

• 1* Filament Dryer
• 1* Adaptor
• 1* Instruction

Say No to Moisture Filaments

If the filaments are moisture, SUNLU Filadryer S1 can dry it

evenly and improve the printing effect greatly. It helps you

avoid wasting filaments and printing failure.

Easy Operation

It is very easy to operate SUNLU filadryer S1. Click

right bottom to set heating temp; Press the left bottom

for 3 seconds to set heating time.

(PV means the actual heating temp in the dryer box;

SV means the temp you set)

Say Good Bye to Failure

SUNLU Filadryer S1 is designed to help you solve the printing

problems like Clogging, Layer shift, Stringing and Ahesion.

Usage steps：1.Load the filament2.pull the filament out from the 1st hole or 2nd hole.3.turn on thr plug4.click right bottom to set temperature5.Clicj left bottom for 3 seconds to set drying timeS1 Dryer SizePrinting work showTemperature can be adjusted ranging from 35℃~55℃. It can dry many kinds of 3d filaments(1.75mm/2.85mm/3mm PLA,PLA Plus,PETG,ABS,TPU...).Drying when you are printing models, it can improve the printing quality and get better printing results. Filadryer S1 is the best 3d printing mate.

On Feb 2, 2024 at 06:37:27 PST, seller added the following information: