SUNLU High Temperature 3D Printer Resin

1. 【High-temperature Resistance 3D Printer Resin】 SUNLU high temperature 3D printer resins are temperature resistant up to 180°C/15 minutes, 150°C/1 hour and 80°C/7 days. SUNLU high temperature 3D printing resins print 3D models with high thermal stability, avoiding cracking and warping at high temperatures.
2. 【Perfect for Printing Injection Molds】SUNLU high temperature 3D printer resin can be used to print small injection models for plastic injection moulds for manufacturing parts. For example: candlesticks.
3. 【High Hardness】Shore hardness of 88D, SUNLU high temperature 3d printing resin printing products have impact resistance, the printing open moulds will not be pressed deformation. It does not break easily.
4. 【High Compatibility】SUNLU high temperature 3d resin has been tested on different printers to ensure that it's suitable for most 4K/8K LCD/DLP/SLA 3D printers. SUNLU 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin.

Matters needing attention:

1. Shake well before use. It is recommended to invert back and forth three times, and the optimal printing environment temperature is 25 ℃ -30 ℃; Prohibit the use of resin in areas exposed to sunlight;

2. Do not take orally, keep away from children, wear gloves before use, avoid direct contact with skin, and maintain indoor ventilation; Do not enter the eyes. If in contact, rinse with plenty of water as soon as possible. If you feel unwell, seek medical attention in a timely manner;

3. The printed resin model needs to be cleaned with over 95% ethanol or isopropanol; Paired with a brush or super wave generator for better results,; The printed model can be directly rinsed with a faucet for 1-2 minutes. If there are many details, it is recommended to use ultrasonic cleaning for 1-2 minutes to achieve optimal performance;

4. Do not pour the resin used in the material tank back into the unused resin, and do not leave the resin unused in the material tank for a long time. (If not used for a long time, the resin can be introduced into the container and sealed with a cling film to prevent it from being contaminated and affecting the printing effect.);

5. Store at room temperature in a dark place, where sunlight contains ultraviolet rays and can cure photosensitive resins; It is recommended to store at an ambient temperature of 15-35 ℃. The lower the winter temperature, the higher the resin viscosity;

6. Seal and store to avoid dust or moisture that may affect printing quality;

7. This resin is suitable for 365-405nm wavelength printers;

This resin has high strength and hardness, making it very easy to form during the printing process. Therefore, when printing a complete test piece and printing a high-temperature resistant model, it is recommended to add an additional 0.3 to 0.8 second layer exposure to achieve better high-temperature resistance performance;

On Jan 5, 2024 at 23:34:07 PST, seller added the following information: