You may also like
Replacement Printer Print Head Printhead QY6-0059 Fit For IP4200 MP500 MP530
29.85 USD
Free shipping
Replacement Printer Print Head QY6-0067 For Ip4500 MP610 MP810 IP5300 MX850 US
67.85 USD
Free shipping
Reufrbished Printer Print Head for iP4600 iP4680 iP4700 iP4760 MP630 QY6-0072
29.85 USD
Free shipping
Replacement PrintHead Print Head 6 Colors For TX800 TX820 A800 F192040 U1
116.85 USD
Free shipping
Replacement Printer Print Head QY6-0086 Fit For MX928 MX728 IX6780 IX6880 MX72
93.85 USD
Free shipping
Reufrbished Printer Print Head fit for Lexmark Pro805 Pro205 209 S408 S505 S508
28.85 USD
Free shipping
Reufrbished Printer Print Head fit for iX4000 iX5000 iP3100 iP3000 QY6-0042
38.85 USD
Free shipping
Replacement Printer Print Head QY6-0077 Fit for PIXMA PRO9500 Mark II nozzle A
119.85 USD
Free shipping
Printhead Printer Head for Kodak 30 ESP Office 2100/ 2150/ 2170 Hero 3.1/ 4.2
20.85 USD
Free shipping
Replacement Printer Print Head QY6-0089 For TS5080 6020 6050 6051 TS6052
38.85 USD
Free shipping
Print Head for L300 L351 L358 L566 ME401 WF2540 XP310 XP303 WF2510 ET2550
43.85 USD
Free shipping
PRINTHEAD Fit for E pson WF3641 XP600/XP601/XP950/XP820 FA09050 Full Colors
225.85 USD
Free shipping
Refurbished QY6-0084 Printhead Fit for Pixma PRO-100 Pinter
Feature:
Excellent performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
Product Condition : Original Refurbished Printhead ,95% New.
Warranty : One Year Free Warranty , Life-long Service.
OEM code: QY6-0084 QY6-0084-000
Compatible Models:
Fit for PRO-100 PRO 100 Pinter QY6-0084
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
Before you install this product, you need to pay attention to:
1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.
2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.
3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.
4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.
5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.
6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.
-About US
Founded in 2012, VIPJQ have professional development and sales, and are involved in various products, providing customers with various high-quality products.
Since its establishment, VIPJQ has always adhered to the service concept of "customer first" and the management concept of "pursuit of quality", and is committed to providing customers with high-quality original designs.
We commit to provide you the best innovative, quality products & professional services with competitive prices.
We value every customer, and we look forward to providing solutions for your business needs to help your business achieve its goals, please contact us immediately! We are all about you!
We are a Japanese seller,but with large warehouse in USA.
We are profesional on Auto Parts,Car Parts,Motorcycle Parts,3C,other hot sale items and so on.
We aim to provide to customers high quality product and best service.
-About Shipment&Returns
The item usually will be dispatched within 3 days after you ordered.All are free shipping.
And it usually takes 3-10 working days to delivery depends on buyers' address or other majeure on the way.
If you are not satisfied with the items and want to return the item,we hope you could message us first,we will give you the return details,
we think we could give you the best service to save your time and money.Thank you.
-About response&Customer Service
If you are enjoy your shopping here,not only enjoy the items but also the service,we are appreciate you could give us a 5-star response.
If you are not satisfied with the item,before you give us the negative response,we hope we could give you the best solution through our commutication.
We think we could do it if you give us the chance.Thank you.
