RAM-B-183U RAM Offset Reservoir Cover Double Ball Mount... For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The RAM-B-183U consists of a brake/clutch reservoir cover plate (1 INCHES ball off-set), STANDARD length double socket arm and diamond base adapter. The base fits cleanly over your existing brake/clutch reservoir cover with the 1 INCHES ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long.hardware included (4) M4 x 20mm Machine Screws(4) M4 x 30mm Machine Screws(4) M4 x 35mm Machine Screws(4) Nylon Spacers(4) M4 Stainless Steel Washersproduct dimensions Overall Height: 5 INCHES socket to socket length 3 INCHES hole pattern 2-Hole AMPS: 1.912 INCHES ball size B Size (1 INCHES )weight capacity Standard Use: 2 lbsHeavy-Duty Use: 1 lbmaterials Marine-grade aluminumpackaging type Poly BagWeight 0.51 lb Additional Information This mount is not compatible with the 2016 BMW R1200RT.hardware included (4) M4 x 20mm Machine Screws(4) M4 x 30mm Machine Screws(4) M4 x 35mm Machine Screws(4) Nylon Spacers(4) M4 Stainless Steel Washersproduct dimensions Overall Height: 5 INCHES socket to socket length 3 INCHES hole pattern 2-Hole AMPS: 1.912 INCHES ball size B Size (1 INCHES )weight capacity Standard Use: 2 lbsHeavy-Duty Use: 1 lbmaterials Marine-grade aluminumpackaging type Poly BagWeight 0.51 lb
