Product Specification:
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C
Heated Bed Temp: 70°C - 90°CFilaments Diameter and Accuracy: 1.75 mm +/- 0.05Filaments Net Weight: 1 kg (2.2 lbs)
Recommended Printing Conditions:Cooling Fan: Turned onPrinting Speed: 30~50(mm/s)Raft Separation Distance: 0.14(mm)Retraction Distance: 4-6 mm for a Bowden setup/1-2mm for a direct drive printer.(Note: Printing conditions may vary with different nozzle diameters.)

• Bubble-Free
• Clog-Free
• Tangle-Free
• Easy Layer Adhesion
• Less Warping
• Environmentally Safe
• Odorless
• Engineered to reduce jamming

Tips for PETG 3D Printing:

PETG filament’s melting point is around 260°C, and it starts transitioning to a more liquid state at about 230°C.
Don’t forget to ensure your FDM extruder and nozzle are able to heat up to temperatures in this range(230°C - 250°C).

Additionally for best results, it is recommended to use an FDM 3D printer with a heated print bed with a temperature setting somewhere around 70°C-90°C.
This will enable better temperature control when the polymer starts to solidify and minimize the risk of warpage.

For optimal adhesion of the part in PETG 3D printing, it is highly recommended to use a build plate adhesive – a regular old glue stick will work for this.
This will help prevent the print from curling off of the print bed which can be a common occurrence in PETG 3D printing.

PETG is really stick to Glass or PEI, Glue stick or Windex layer is recommendedto prevent possible damage to the surface.

"Yes, this is the same high quality PETG filaments we are using in our own 3D printing farm(Michigan) daily.
We are printing over 200 rolls on 40 printers for our happy customers every month!"
Packaging Included:
1 × spool of PETG filaments