Siemon 9T6P4-A5-06-250 CAT6A cable allows for the transmission of up to 10Gbps and is fast becoming the cabling infrastructure of choice for VoIP, CCTV and data networks. Specified for use in Class Ea networks, CAT6A cable allows for extremely high data rate transmission of up 10Gbps and at a frequency of 500Mhz.

CAT6A U/UTP means the cable consists of 4 unshielded twisted pairs and no outer shielding.

CAT6A F/UTP means the cable consists of 4 unshielded twisted pairs however it contains an outer foil shield. This is a shielded cable.

There is also S/FTP (screened/foiled twisted pair) cable, normally a CAT7 cable that has four individually shielded pairs and an outer screen braid around all four pairs.

CAT 6A U/UTP is constructed in a certain way to help minimize cross talk and ANEXT. This includes larger conductors, (23 AWG minimum), tighter twists, extra internal airspace, an internal separator between the pairs, and thicker outer jacket. These features typically increase the outer diameter of the cable.

CAT6A F/UTP is constructed in a similar manner however it contains an outer foil shield, underneath the outer cable jacket.

The foil shield acts as a barrier preventing EMI/RFI from coupling onto the twisted pairs from adjacent cables. In effect, it reflects the noise or interference from lights, machinery and other sources of EMI, as well as RFI from cell phones and wireless access points, In addition, the foil shield prevents data signals from leaking out of the cable.

If you are using shielded F/UTP CAT6A cable in an installation, a compatible shielded connector should be used. Likewise, an unshielded cable should be used with unshielded connectors.

A Brand New Cat6A Shielded FTP Cable Plenum rated .Buy Now! Don't wait!